When working in the dental or medical community, whether it’s ophthalmology or practicing Lasik, tattoo, or piercings, it’s imperative to keep surfaces clean at all times. Research has shown that while cleaning is vital, it is only the first step to removing bacteria and pathogens from equipment. All tools that are to be reused need to be sterilized after being washed and one of the best sterilizing machines in the market is the m9 ultraclave. A lot of professionals have heard about it, but you may be wondering how this machine works, and how to keep functioning properly. Here is everything you should know about m9 ultraclaves:
What is an m9 ultraclave sterilizer?
This is a compact unit with reliable sterilizing power you need. It is suitable for compact spaces, easy to operate, and reliable. Once you load the m9 Ritter autoclave, all you need to do is set it and let it do its work. The machine has automatic drying, which makes it convenient for users. People interacting with the device for the first time do not need to worry about difficulty in use. The sterilizer comes with an intuitive display and prompts, which makes it easy to select the cycle you need to use.
How should the Ritter m9 ultraclave be installed?
The optimum performance of the sterilizer will depend on your installation. To get optimum performance, place your sterilizer on a level surface and ensure it fits perfectly on the chamber. You must make sure that your chamber is made from water and heat resistant material. The heat at the bottom of the sterilizer could reach the heights of 71 degrees as you sterilize your equipment.
It may be convenient for you to place your table autoclave next to a wall. If this is the case, make sure that there is a distance of 51 mm between the side of the wall and the sterilizer. To provide proper access to the top chambers, sterilizers to be placed underneath surfaces should have a distance of 22 inches between the top of the sterilizer and the top surface. Remember to place the table top autoclave with the front near the support surface. This will make it easy for you to drain water using the drain tube into a container.
How should you maintain your m9 ultraclave sterilizer?
You can choose to do the maintenance yourself or have an autoclave maintenance service do it for you. However, the best way is to combine the two. It is your responsibility to have routine maintenance procedures to ensure your sterilizer operating correctly. Ask your maintenance service provider to recommend the best program to follow.
Make sure that you clean external surfaces and the door gasket every day. Every week, clean the chamber trays by draining the water from the reservoir and cleaning the inside of the sterilizer. You need to flash the system every month because it protects the intricate parts of the unit. You must perform a pressure reliable valve check and clean the chamber filters.
Removing and cleaning the door gasket should be once in four months. If you notice anything wrong with your machine, be sure to take it to an autoclave repair service provider for a routine checkup. Once they have a look, you will be advised on the best course of action.
The efficiency and ease of use and maintenance of this sterilizer make it one of the best to use in the industry. It is suitable for tattoo parlors, piercing parlors, veterinarian clinics, and even hospitals.
StatimUSA.com is your number 1 resource for all things autoclaves, we sell new autoclaves, repair your old autoclave and even purchase your old autoclave back from you. Try us today, you wont regret it! You can reach us at firstname.lastname@example.org or call our FREE TECHNICAL SUPPORT LINE at 704-978-8759.