Midmark

• Midmark has designed the M11 with features that have benefits which are directly perceptible to the operator or practice manager. One of the most important is the automatic opening door on Ultraclave model that is a handy feature for Nail Salons.
  By having the door open automatically at the end of the cycle, the most obvious benefit is that the unit is now in the dry mode and to alert the operator that the current sterilizing cycle is over.
• Large 11″ by 18″ chamber for increased load capacity
• For most operational needs, the user needs only to push two buttons to begin a sterilizing cycle. After loading the materials and closing the door, the operator simply pushes one key to select one of the regular cycles and a second button starts the operation. No further operator interaction is needed.
• Single button controls allow quick sterilizing of items by using the four defined cycles: “Unwrapped.”, “Pouches,” “Packs,” or “Hand pieces.” Each of these has a particular sterilizing temperature, time, venting type and drying time established as follows: Unwrapped (132º C or 270º F for 3 minutes), Pouched (132º C or 270º F for 5 minutes), Packs (121º C or 250º F for 30 minutes), Hand pieces. The cycle begins by pressing the “start” button.
• The Bright Green LCD Display on the Midmark M11 autoclave is a comfortable view of indicators. The display indicates the cycle selected, temperature and exposure time for the selected cycle. During the event, the display shows messages describing the status of the cycle. When the cycle enters sterilization mode, the remaining time is there as well as temperature and pressure.

Self Programmable Digital Control

Programmable controls allow for the creation of various cycle parameters to meet your unique sterilization needs.

• Time (3 to 90 minutes)
• Temperature (230 to 275°F)
• Dry Time (0 to 60 minutes)
• Vent (slow or fast) and two program buttons.
• The one and two buttons allow you to store the change if desired for future use.

Warranty

• One full year on site parts and labor

Unit Size

• Overall length w/plug: 23.8″ (60.5 cm)
• Overall width: 17.8″ (45.2 cm)
• Overall height w/printer: 17.8″ (45.2 cm)
• Minimum Counter top area: 17.8″ x 21.0″ (45.2 x 53.3 cm)

Chamber Size

• 11″ diameter (28 cm)
• 18″ depth (45.7 cm)
• 6.5 gal. usable volume (24.6 liters)

Tray Size

• (2) Large Trays – 9″ W (22.9 cm) x 15″ L (38 cm) x 1.1″ D (2.9 cm)
• (2) Small Trays – 6.6″ W (16.8 cm) x 15″ L (38 cm) x 1.1″ D (2.9 cm)

Unit Height

• 99 lbs. (44.9 kg)

Shipping weight with pallet

• 131 lbs. (59.4 kg)

Reservoir capacity

• 1.4 gal. (5.3 liters)

Electrical Requirements

• 115 VAC, 50/60 Hz, 15 Amps, Single Phase
• 115 VAC has 1425 watt tubular immersion heater

Certifications

• UL61010A-1, UL61010A-2-041
• CAN/CSA C22.2 No. 1010
• CAN/CSA C22.2 No. 1010.2-041-96
• Meets all the requirements of ASME Boiler and Pressure Vessel Code
• Canadian Registration Number (CRN) available

This sterilizer requires a separate (dedicated) circuit

Overall Length w/Plug: 20.4″ (51.8 cm)
Overall Width: 15.3″ (38.9 cm)
Overall Height w/Printer: 15.8″ (40.1 cm)
Minimum Counter Top Area: 15.3″ x 17.9″ (38.9 cm x 45.4 cm)
Unit Weight: 73 lbs (33.1 kg)
Shipping Weight: 81 lbs. (36.7 kg)
Water Reservoir Capacity: 1.1 gallons (4.1 liters)
Electrical Requirements: 115 VAC, 50/60 Hz, 15 Amps, Single Phase. Please note that a separate, dedicated circuit is recommended for this sterilizer.
Chamber Diameter: 9″ (22.9 cm)
Chamber Depth: 15″ (38.1 cm)
Chamber Volume: 3.5 gallon (13.4 liters)
Large Tray Size (2 Included): 7.3″ (18.6cm) Wide x 12″ (30.5cm) Long x .8″ (2.2cm) Deep
Small Tray Size (2 Included): 5.6″ (14.3cm) Wide x 12″ (30.5cm) Long x .8″ (2.2cm) Deep
Warranty: 1 Year Factory Warranty
Meets the requirements of ASME Boiler and Pressure Vessel Code