How to Troubleshoot Error Code 6 on the Enbio S

This is a continuation in our set of articles to help you troubleshoot problems and errors your Enbio S Automatic Autoclave may experience in the form of error codes. We will help you understand why each one displays and the proper steps you should take at that time. Today we will be talking about the troubleshooting process behind Error Code 6.

We have an accompanying video here if you’re more of a visual learner.

And if you just want to talk to someone for any questions you may have, call our Free Tech Support at 704-966-1650 Option 3.

 

What is Error Code 6

Error Code 6 is displayed when there is an issue with the chamber and wall temperature getting too low. This can be linked to an issue referring to a few specific parts. The thermocouple, the board, the water pump, or a combination of a few different issues.

The Solution: Error Code 6 IS NOT an end-user repair. Enbio recommends that a qualified technician should handle this repair for you.

---

As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT.”

We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with.

You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything.

---

The Enbio S Automatic Sterilizer is available for purchase here.

Any parts you require for your Enbio S can be purchased here.