Enbio Videos
Enbio S Setup Guide
In this video we will show you how to set up your Enbio S Automatic Sterilizer with what comes provided.
We will briefly explain what is included with your purchase of the Enbio S. And show you how to properly connect and setup everything involved.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:19 Distilled Water Line
00:38 Waste Water Line
00:50 USB Thumb Drive and Bio Filter
01:19 Connecting the Waste Water/Distilled Water Jugs
#enbio #enbios
Introduction to the Enbio S Autoclave
In this video we will introduce you to the Enbio S Automatic Sterilizer.
We will briefly explain what is included with your purchase of the Enbio S. As well as some of the main functions and cycle types and times it can provide.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #enbios #shorts
How to Remove the Front Facia on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove the front facia from the Enbio S.
To remove the front facia you will need to remove the Top Cover, which we show you how to do here:
https://youtu.be/Viq_h94Rfwg
You will also need to remove the door, which we have a video on doing here:
https://youtu.be/OiFRl0tZ_fw
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:27 Undo the Ribbon Cable
00:47 Remove the 4 Screws
01:06 Remove Door Magnet Cable
01:17 Remove Front Facia
#enbio #enbios #maintenance
How to Reinstall the Front Facia on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to reinstall the front facia from the Enbio S. The front facia should be removed if there is a problem with the LCD or the ribbon cable.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:24 Realign Door Magnet Cable
00:55 Reinstall Ribbon Cable
01:41 Reinstall Front Facia Screws
#enbio #enbios #maintenance
How to Replace the Top Cover on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to replace the door on the Enbio S. The Top Cover had been removed for previous maintenance on the inner workings of the unit, but now it's time to reinstall it. The installation of the top cover will also provide realignment for the front facia of the unit.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:29 Slide the Top Cover Into Place
01:33 Screw the First 5 Screws In
01:53 Screw the 6th Screw In
02:22 Tighten the Inner Facia Screws
02:44 Inspect for Gaps and reinstall Tray
#enbio #enbios #maintenance
How to Troubleshoot Error Code 1 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 1 on the Enbio S. Error Code 1 is displayed when the chamber temperature is inaccurate. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 2 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 2 on the Enbio S.Error Code 2 is displayed when there is a problem in reference to the steam generator temperature. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Remove the Door From Your Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove the front door of your Enbio S Automatic Sterilizer.
We will go over the tools you need to complete this task. And how to properly go about removing the door from your unit.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:21 Move the Tray Back
00:33 Remove the 2 Screws from Both Sides
#enbio #enbios #maintenance
How to Replace the Door on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to reinstall the door on the Enbio S. The front door had been removed for previous maintenance on the gasket, but now it's time to reinstall it.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:15 Make Sure Guide Rails Are Out
00:31 Slide Door Into Place
00:46 Screw Door Into Place
01:04 Place Tray Back Into Drawer
#enbio #enbios #maintenance
How to Remove and Reinstall the Door Gasket From Your Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove the door gasket from your Enbio S Automatic Sterilizer. And subsequently, how to reinstall it back into place.
We will go over the tools you need to complete this task. And how to properly go about removing the door gasket from your unit.
But first, you'll want to remove the door itself, which we help you do in this video:
https://youtu.be/OiFRl0tZ_fw
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:22 Remove Door Plate Screws
00:38 Separate Gasket from Door Plate
01:02 Remove Plastic Cover Screws
01:18 Remove Metal Cover Screws
01:44 Remove Metal Gasket Cover
02:10 Reinstalling the Gasket
02:32 Reinstall Metal Gasket Screws
02:42 Reattach Plastic Cover
02:58 Reinstall Plastic Cover Screws
03:40 Reinstall Door Plate Screws
#enbio #enbios #maintenance
How to Remove the Top Cover From Your Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove the top cover from the Enbio S. We will go over the tools you need to complete this task. And how to properly go about removing the top cover from your unit.
While it is not required, we mentioned that the door has been removed in a previous video that you can find here:
https://youtu.be/OiFRl0tZ_fw
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:36 Unscrew the 5 Torx T10 Screws
00:51 Unscrew the 1 Torx T20 Screw
01:10 Slide the Cover Off
#enbio #enbios #maintenance
Replacing Valve 5 on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove Valve 5 from the Enbio S.
To remove this valve you will need to remove the Top Cover, which we show you how to do here:
https://youtu.be/iFk6oJSXaIA
We also mention the removal of the door, which we have a video on here:
https://youtu.be/OiFRl0tZ_fw
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
You can purchase a replacement Valve 5 in the link below:
https://statimusa.com/product/enbio-s-valve-pv-782-v02-v03-v05-oem-1-8-70771a1/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:32 Disconnect Electrical Connectors and Tubes
01:25 Remove Valve 5
01:40 Reinstall Valve 5
01:58 Push Tubing Back Into Valve
02:28 Plug Electrical Connectors Into Valve
#enbio #enbios #maintenance
How to Troubleshoot Error Code 3 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 3 on the Enbio S. Error Code 3 is displayed when the process has exceeded its temperature. It can also possibly be displayed for a couple of other issues and would need to be further diagnosed. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 4 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 4 on the Enbio S. Error Code 4 is displayed when there is an issue with the chamber temperature and pressure. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 5 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to troubleshoot one of the error codes of the Enbio S. Specifically we'l go over Error Code 5 in this video, about what it means when it's displayed, and how to solve or fix the issue.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 6 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 6 on the Enbio S. Error Code 6 is displayed when there is an issue with the chamber and wall temperature getting too low. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 7 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 7 on the Enbio S. Error Code y displays when a sudden increase in temperature occurs. This will only happen during Class B cycles. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 8 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 8 on the Enbio S. Error Code 8 is displayed when there are either too many steam pulses in your machine, or the machine has no water. The part of this error that we go over in this video will require you to check on your distilled water line.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 9 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 9 on the Enbio S. Error Code 9 is displayed when there is a possible blockage of drainage somewhere in the unit. This is unfortunately NOT an end-user repair and will need to be sent in to an Enbio authorized technician for further diagnosis.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 10 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 10 on the Enbio S. Error Code 10 displays when there is an error with the chamber temperature. This can be linked to a board issue. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
Enbio S Setup Guide
Enbio S Setup Guide
In this video we will show you how to set up your Enbio S Automatic Sterilizer with what comes provided.
We will briefly explain what is included with your purchase of the Enbio S. And show you how to properly connect and setup everything involved.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:19 Distilled Water Line
00:38 Waste Water Line
00:50 USB Thumb Drive and Bio Filter
01:19 Connecting the Waste Water/Distilled Water Jugs
#enbio #enbios
Introduction to the Enbio S Autoclave
In this video we will introduce you to the Enbio S Automatic Sterilizer.
We will briefly explain what is included with your purchase of the Enbio S. As well as some of the main functions and cycle types and times it can provide.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #enbios #shorts
How to Remove the Front Facia on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove the front facia from the Enbio S.
To remove the front facia you will need to remove the Top Cover, which we show you how to do here:
https://youtu.be/Viq_h94Rfwg
You will also need to remove the door, which we have a video on doing here:
https://youtu.be/OiFRl0tZ_fw
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:27 Undo the Ribbon Cable
00:47 Remove the 4 Screws
01:06 Remove Door Magnet Cable
01:17 Remove Front Facia
#enbio #enbios #maintenance
How to Reinstall the Front Facia on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to reinstall the front facia from the Enbio S. The front facia should be removed if there is a problem with the LCD or the ribbon cable.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:24 Realign Door Magnet Cable
00:55 Reinstall Ribbon Cable
01:41 Reinstall Front Facia Screws
#enbio #enbios #maintenance
How to Replace the Top Cover on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to replace the door on the Enbio S. The Top Cover had been removed for previous maintenance on the inner workings of the unit, but now it's time to reinstall it. The installation of the top cover will also provide realignment for the front facia of the unit.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:29 Slide the Top Cover Into Place
01:33 Screw the First 5 Screws In
01:53 Screw the 6th Screw In
02:22 Tighten the Inner Facia Screws
02:44 Inspect for Gaps and reinstall Tray
#enbio #enbios #maintenance
How to Troubleshoot Error Code 1 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 1 on the Enbio S. Error Code 1 is displayed when the chamber temperature is inaccurate. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 2 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 2 on the Enbio S.Error Code 2 is displayed when there is a problem in reference to the steam generator temperature. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Remove the Door From Your Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove the front door of your Enbio S Automatic Sterilizer.
We will go over the tools you need to complete this task. And how to properly go about removing the door from your unit.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:21 Move the Tray Back
00:33 Remove the 2 Screws from Both Sides
#enbio #enbios #maintenance
How to Replace the Door on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to reinstall the door on the Enbio S. The front door had been removed for previous maintenance on the gasket, but now it's time to reinstall it.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:15 Make Sure Guide Rails Are Out
00:31 Slide Door Into Place
00:46 Screw Door Into Place
01:04 Place Tray Back Into Drawer
#enbio #enbios #maintenance
How to Remove and Reinstall the Door Gasket From Your Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove the door gasket from your Enbio S Automatic Sterilizer. And subsequently, how to reinstall it back into place.
We will go over the tools you need to complete this task. And how to properly go about removing the door gasket from your unit.
But first, you'll want to remove the door itself, which we help you do in this video:
https://youtu.be/OiFRl0tZ_fw
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:22 Remove Door Plate Screws
00:38 Separate Gasket from Door Plate
01:02 Remove Plastic Cover Screws
01:18 Remove Metal Cover Screws
01:44 Remove Metal Gasket Cover
02:10 Reinstalling the Gasket
02:32 Reinstall Metal Gasket Screws
02:42 Reattach Plastic Cover
02:58 Reinstall Plastic Cover Screws
03:40 Reinstall Door Plate Screws
#enbio #enbios #maintenance
How to Remove the Top Cover From Your Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove the top cover from the Enbio S. We will go over the tools you need to complete this task. And how to properly go about removing the top cover from your unit.
While it is not required, we mentioned that the door has been removed in a previous video that you can find here:
https://youtu.be/OiFRl0tZ_fw
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:36 Unscrew the 5 Torx T10 Screws
00:51 Unscrew the 1 Torx T20 Screw
01:10 Slide the Cover Off
#enbio #enbios #maintenance
Replacing Valve 5 on the Enbio S
Attention: Enbio recommends that the described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to remove Valve 5 from the Enbio S.
To remove this valve you will need to remove the Top Cover, which we show you how to do here:
https://youtu.be/iFk6oJSXaIA
We also mention the removal of the door, which we have a video on here:
https://youtu.be/OiFRl0tZ_fw
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
You can purchase a replacement Valve 5 in the link below:
https://statimusa.com/product/enbio-s-valve-pv-782-v02-v03-v05-oem-1-8-70771a1/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
00:00 Intro
00:32 Disconnect Electrical Connectors and Tubes
01:25 Remove Valve 5
01:40 Reinstall Valve 5
01:58 Push Tubing Back Into Valve
02:28 Plug Electrical Connectors Into Valve
#enbio #enbios #maintenance
How to Troubleshoot Error Code 3 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 3 on the Enbio S. Error Code 3 is displayed when the process has exceeded its temperature. It can also possibly be displayed for a couple of other issues and would need to be further diagnosed. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 4 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 4 on the Enbio S. Error Code 4 is displayed when there is an issue with the chamber temperature and pressure. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 5 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will show you how to troubleshoot one of the error codes of the Enbio S. Specifically we'l go over Error Code 5 in this video, about what it means when it's displayed, and how to solve or fix the issue.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 6 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 6 on the Enbio S. Error Code 6 is displayed when there is an issue with the chamber and wall temperature getting too low. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 7 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 7 on the Enbio S. Error Code y displays when a sudden increase in temperature occurs. This will only happen during Class B cycles. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 8 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 8 on the Enbio S. Error Code 8 is displayed when there are either too many steam pulses in your machine, or the machine has no water. The part of this error that we go over in this video will require you to check on your distilled water line.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 9 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 9 on the Enbio S. Error Code 9 is displayed when there is a possible blockage of drainage somewhere in the unit. This is unfortunately NOT an end-user repair and will need to be sent in to an Enbio authorized technician for further diagnosis.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
How to Troubleshoot Error Code 10 on the Enbio S
Attention: Enbio recommends that any described service work be performed by a certified Enbio technician. Sterilizer Autoclave Solutions is your United States authorized Enbio warranty, service and repair center.
In this video we will go over Error Code 10 on the Enbio S. Error Code 10 displays when there is an error with the chamber temperature. This can be linked to a board issue. However, this error code is not an end-user repair and will need to be sent in to an Enbio authorized repair technician.
The Enbio S Automatic Sterilizer is available here:
https://statimusa.com/product-category/enbio/enbio-autoclaves/enbio-s/
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT” here. https://statimusa.com/free-autoclave-technical-support/
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with here. https://statimusa.com/stanley-sterili...
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything. https://statimusa.com/connect-with-us/
#enbio #error #shorts
Enbio S Setup Guide