Rejuvenate Concentrate Quick Start Guide Leave a comment
This article is a quick start guide for your Rejuvenate Concentrate. And if you just want to talk to someone, call our Free Tech Support at 704-966-1650 Option 3.
Where to Use Rejuvenate Concentrate
Rejuvenate Concentrate is an effective and convenient choice for everyday use. It is ideal for facility disinfection, plus it’s economical.
Perfect for use on:
- Hard Non-Porous Surfaces and Equipment
- Workstations
- Countertops
- Chairs and Stools
- Circulating* and Non-Circulating Footbaths
- Kitchen and Staff Rooms
- Other Large Surfaces
| Dilution | Contact Time |
|---|---|
| 1:16 or 2oz of concentrate to 32oz of water | 5 Minutes Bacteria, Viruses & Fungi Surface should be visibly wet for the entire contact time. |
How to Use Rejuvenate Concentrate
STEP ONE
- Dilute the concentrate solution
- Dilute Rejuvenate™ Concentrate at a 1:16 dilution ratio (one part Rejuvenate™ with 16 parts water or 2oz of concentrate to 32oz of water)
STEP TWO
- Apply diluted solution on surface until completely wet
- Remove any visible dirt or debris from surface, or equipment prior to spraying. Diluted solution can be used for up to 90 days in a spray bottle.
STEP THREE
- Allow surface to remain visibly wet for 5 minutes
- Allowing surfaces to remain wet for 5 minutes kills viruses, bacteria and fungi per label instructions.
STEP FOUR
- Leave to air dry
- If desired, you may wipe excess solution using a clean cloth after the required contact time has been achieved.
Success & Troubleshooting Tips
Measure. Measure. Measure.
Using a measuring cup while diluting will help ensure your solution is properly mixed and effective.
More is NOT Better.
Follow the dilution ratios and you will conserve product and prevent unnecessary issues. When diluted properly, Rejuvenate™ Concentrate is a cost-effective solution for your everyday disinfection needs.
Start Fresh.
Bottles and secondary containers should not be topped up with fresh diluted solution. Instead, ensure the containers are emptied, cleaned and dried prior to refilling with new solution to ensure it’s effective every time. Remember to also place a workplace label on any new bottles, for easy identification.
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT.”
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with.
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything.
You can read Rejuvenate’s other Quick Start Guides here:
Rejuvenate Wipes Quick Start Guide