W&H Lexa Mini Error Codes 216-243
Understanding the error codes that may arise while using any autoclave is crucial for ensuring its optimal performance and reliability. So in this article, we will delve into some of the
various error codes of the W&H Lexa Mini. Specifically, we’ll be going over Error Codes 216-243. These are not the error codes that we’ve previously shown in our original article here. These are from an updated version of W&H’s official troubleshooting manual with new types of error codes. So in this article, we’ll go over the details of what each code means, as well as actions you can take to troubleshoot them.
If you have any questions about these error codes, the W&H Lexa Mini or anything else, please give us a call at 704-966-1650 Option 3 for our Free Tech Support Line.
Error Codes
Error Code 216
Description:
Chamber heater sensor error
Possible Cause 1:
Main board failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Possible Cause 2:
Chamber heater sensor failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Error Code 217
Description:
Chamber heater sensor error (chamber temperature > 141 °C) or disconnected (417 °C)
Possible Cause 1:
Chamber heater sensor disconnected.
Action:
Check the connection to the main board and the relevant wires. If the error persists, see next possible cause.
Possible Cause 2:
Main board failure.
Chamber heater sensor failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Error Code 230
Description:
Steam generator temperature sensor error
Possible Cause 1:
Main board failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Possible Cause 2:
Steam generator sensor failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Error Code 231
Description:
Steam generator temperature sensor error (steam generator temperature > 330 °C) or disconnected (417 °C) .
Possible Cause 1:
Steam generator sensor disconnected.
Action:
Check the connection to the power board and the relevant wires. If the error persists, see next possible cause.
Possible Cause 2:
Main board failure.
Steam generator sensor failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Error Code 240
Description:
Steam generator heating element error or disconnected (coil L1)
Possible Cause 1:
Heating element thermostat activated.
Action:
Reset the steam generator thermostat. Check the thermostat continuity (0 Ω). If open, replace the component.
Possible Cause 2:
Heating element not properly connected.
Action:
Check the connections and the wires between the heating element and the main board. If the error persists, see next step.
Possible Cause 3:
Power board failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Possible Cause 4:
Heating element failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Error Code 241
Description:
Steam generator heating element error (coil L1)
Possible Cause 1:
Heating element thermostat activated.
Action:
Reset the steam generator thermostat. Check the thermostat continuity (0 Ω). If open, replace the component.
Possible Cause 2:
Heating element not properly connected.
Action:
Check the connections and the wires between the heating element and the main board. If the error persists, see next step.
Possible Cause 3:
Power board failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Possible Cause 4:
Heating element failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Error Code 242
Description:
Steam generator heating element error or disconnected (coil L2) (apply actions to L2.)
Possible Cause 1:
Heating element thermostat activated.
Action:
Reset the steam generator thermostat. Check the thermostat continuity (0 Ω). If open, replace the component.
Possible Cause 2:
Heating element not properly connected.
Action:
Check the connections and the wires between the heating element and the main board. If the error persists, see next step.
Possible Cause 3:
Power board failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Possible Cause 4:
Heating element failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Error Code 243
Description:
Steam generator heating element error or disconnected (coil L2) (apply actions to L2.)
Possible Cause 1:
Heating element thermostat activated.
Action:
Reset the steam generator thermostat. Check the thermostat continuity (0 Ω). If open, replace the component.
Possible Cause 2:
Heating element not properly connected.
Action:
Check the connections and the wires between the heating element and the main board. If the error persists, see next possible cause.
Possible Cause 3:
Power board failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
Possible Cause 4:
Heating element failure.
Action:
Call in to our Free Tech Support Line at 704-966-1650 Option 3.
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT.”
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with.
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything.
The W&H Lexa Mini is available on our website here.
W&H Lexa Mini Error Codes 10-70 area available to view on our site here.
The W&H Lexa Mini Error Codes 80-99 area available to view on our site here.
W&H Lexa Mini Error Codes 100-150 area available to view on our site here.
W&H Lexa Mini Error Codes 160-183 area available to view on our site here.
W&H Lexa Mini Error Codes 205-215 area available to view on our site here.