How Does the Enbio Pro Beat the Competition?
The Enbio Pro is the successor to Enbio’s award winning compact steam sterilizer, the Enbio S. What Enbio did for compact autoclaves was something that seemed like it couldn’t be topped. But they managed to do it again with the Enbio Pro. A virtual upgrade to the S, boasting both better speed and capacity in a lightweight package. This compact powerhouse can do it all.
However, comparing it to the Enbio S can only get you so far. Sure, talking about the predecessor to an upgrade and stating the new bels and whistles is obvious. But where it really matters is how it stacks up to the competition. The Enbio Pro isn’t the only compact unit on the market, but it may surprise you in how it compares.
So in this article, we’d like to look at some of the comparisons of the Enbio Pro against some other autoclaves in the market, both compact and full sized.
How Does the Enbio Pro Beat the Competition?
To better make a comparison, first we need to look at some of the features and specs on the Enbio Pro
Fast Workflow
The problem with how some other competitors advertise their autoclaves is that some focus too much on capacity. But when it comes to a fast, efficient workflow, it’s all about instrument turnaround. How fast can you get an instrument back into use with a patient?
Well that’s not a problem for the Enbio Pro. With ultra-short cycles as short as 9 minutes, rapid drying on all cycles, and dramatically high chair utilization… The Enbio Pro has been created as a compact powerhouse that’s a force to be reckoned with in terms of speed and turnaround times.
Productivity
Speed and turnaround are an essential part to a fast workflow. But all of that speed is wasted if you don’t have anywhere to put your autoclave. Thankfully, the dimensions of the Enbio Pro offer it a much bigger advantage than most tabletop autoclaves.
The Enbio Pro’s compact footprint makes it ideal for urban and premium clinics. And the dimensions itself ensure that it can fit into the tightest of sterilization rooms. Which means you get more sterilization power per square inch.
No Headaches
One of the main things the Enbio Pro helps to avoid is, simply, the headaches. Many traditional units require multiple steps worth of an installation process. An intricate venture that leaves your head spinning just to ensure you get your tools clean. But Enbio’s trademark design lends the Pro to be professional not only in its work, but in its quality of life improvements as well.
The Enbio Pro requires NO fixed water connection and NO draining. With its plug-and-play design, all you need to set up your Enbio Pro is a simple set down of the unit, the twist of the HEPA filter, the plug of the water tubing and power cord…. And your autoclaves is good to go.
Making the Enbio Pro perfect for new practices and an upgrade to existing practices alike. And its design and setup allow for more mobility. So for the mobile rooms, the Enbio Pro can take its power on the go.
Performance and Saving Money
Another of the Enbio Pro‘s best traits is how it can save both time and, in turn, money. The Pro utilizes super fast sterilization cycles, and faster cycles mean a few things:
- Fewer instrument sets are needed.
- Less capital tied in inventory.
- Smoother patient flow between cycles.
The Enbio Pro not only becomes a profit enabler, but it also offers premium performance on top of that. With the Pro, clinics get fast, Class B cycles complimented by a triple vacuum setup. With an easy-to-use system that creates easy access to top speed, medical grade reprocessing. All without complicated training or maintenance.
Some of the Enbio Pros biggest advantages lie in the availability right at your fingertips. Intuitive color touchscreen to navigate it all. Digital reports that can be saved to USB or even online wirelessly, and all automatically. With a sleek, non-intrusive look and an exterior LED to show cycle status without having to lift a finger.
It’s the newest in compact autoclaves designed for modern practices. Now that you know more about it, it’s time to do some true comparisons.
What Can the Enbio Pro Do Better Than the Rest?
One of the best ways to look at how the Enbio Pro stacks up to the current competition is simple: data. Looking at the specific numbers and making a true, in-depth comparison is one of the best ways to see this point in action.
Enbio Pro Statim G4 2000 Statim G4 5000 Midmark M3 Midmark Ritter M9 Midmark M11 Gen 5 Tuttnauer T-Edge 11S Tuttnauer 2340M
Sterilization time
unwrapped instruments
without drying [min]9 6 9 6 18 18 20 13
Sterilization time
wrapped instruments
without drying [min]15 35 40 43 47 55 39 55
Pouches per load (max) 16 5 12 6 8 14 16 15
Weight of the load
(max) [lb] 1.8 2.2 3.3 2.4 9 9 7 7
Cycles per hour
(wrapped, with drying) 3 2 2 1 1 1 1 1
Pouches per hour 48 10 24 18 25 14 16 15
Pre-vacuum, class B yes no no no no no yes no
Weight [lb] 44 46 73 71 73 99 124 85
Dimensions [in] 22.6 x 10.6 x 7.9 19.5 x 16.3 x 5.9 23.6 x 16.1 x 7.5 22 x 17.8 x 6.9 20.4 x 15.3 x 15.4 23.5 x 17.8 x 18.6 22.8 x 18.9 x 19.23 21.5 x 20 . 14.4
Chamber capacity [l] 5.3 1.8 5.1 1.8 13.4 24.6 27 19
Cycles per gal of water 29 37 19 18 13 29 11 9
Water consumption per
process [fl oz] 4.4 3.4 6.5 6.8 9.5 4.4 11 13.5
What Does the Data Tell Us?
We get it, while the data is accurate, looking at numbers can be a bit of a headache. So let’s break it down into the essential points, and look at what it tells us.
Superior Speed & Throughput
As you’ll see in the data, while certain cycle times for unwrapped instruments may seem comparable (with Enbio Pro at 9 minutes vs. others at 6–13 minutes), it is the total instrument turnaround that gets you the results you need.
- Wrapped Cycle Dominance: Enbio Pro finishes a wrapped, dry cycle in just 15 minutes. Compare that to the 40–55 minutes required by traditional units like the Midmark M11 or Statim 5000.
- Maximized Capacity: It handles 16 pouches per load. When combined with its speed, you get 48 pouches per hour. Most competitors only manage 10 to 25 pouches in that same hour.
- Higher Frequency: You can run 3 full cycles per hour , whereas heavy-duty models like the Tuttnauer 2340M or Midmark Ritter only manage 1 cycle per hour.
High-End Certification & Safety
Don’t let the compact size fool you; the Enbio Pro offers the highest level of medical safety.
- Class B Pre-Vacuum: The Enbio Pro is a true Class B sterilizer. Many popular competitors, including the Midmark M9, M11, and Statim 2000/5000, are not Class B units.
- Load Weight: It efficiently handles a maximum load weight of 1.8 lb. While larger “chamber” units can hold more weight, they take significantly longer to process it, making the Enbio Pro more efficient for constant, daily use.
Resource & Space Efficiency
The Enbio Pro is designed to fit your clinic, not the other way around.
- Compact Footprint: At roughly 22.6 x 10.6 x 7.9 inches, it is significantly sleeker than the Tuttnauer T-Edge or Midmark M11, which can take up twice as much counter height and width.
- Portable Power: At only 44 lb, it is nearly 1/3 the weight of the Tuttnauer T-Edge which sits at124 lbs , making it the best choice for mobile rooms or easy office reconfigurations.
- Water Savings: It uses only 4.4 fl oz of water per process. You get 29 cycles per gallon, whereas a sterilizer like Tuttnauer 2340M only gives you 9 cycles before you need to refill.
Final Thoughts
The Enbio Pro fundamentally redefines professional sterilization by prioritizing turnaround speed and operational efficiency over the bulk capacity of traditional machines. By delivering medical-grade Class B sterilization in as little as fifteen minutes for wrapped instruments, it allows a busy practice to process up to forty-eight pouches every hour, effectively tripling the output of standard industry competitors. This rapid cycle time, combined with a sleek and compact footprint, ensures that high-volume clinics can maintain a continuous workflow without the need for an oversized equipment graveyard on their countertops.
Ultimately, the Enbio Pro serves as a sophisticated solution for the modern practitioner, trading the complexity and slow pace of legacy autoclaves for a streamlined, intuitive system that keeps the focus entirely on patient care. If you’d like to read more about the Enbio Pro, we have an overview article on our website here. You can also find more info on the Enbio Pro‘s listing on our site here. If you have any questions about the Enbio Pro, autoclaves or anything else, give us a call at 704-966-1650 and we’ll help you find what you need.
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT.”
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with.
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything.