This post was originally published on 6-15-18 and updated on 4-22-19- This is an overview of your Ritter M9 Ultraclave and Ritter M11 Ultraclave monthly maintenance instructions. However, always refer
This post was originally published on 6-12-18 and updated on 4-10-19. Sterilization protocol is a major part of every medical and dental practice’s daily routine. When considering sterilization system options,
Autoclaves are crucial instruments in settings like tattoo parlors, veterinary clinics, medical laboratories, and hospitals. The pressurized steam generated in an autoclave runs at about 270 degrees Fahrenheit and 30
Did your Statim 2000 or Statim 5000 just display a Cycle Fault #1 Error? Don’t worry there is no need to panic. In this series, we want to give
This is an overview of how to operate a Midmark M9 and M11 Autoclave through a proper sterilization cycle. Remember to always read the appropriate technical documentation before beginning. There
In the first part of this two-part series, we answered some important questions about autoclave maintenance: what the common causes of damage are, what kind of preventative measures should be
The concept of steam sterilizers has been around for quite a long time — in fact, it was in the mid-19th century when French chemist Louis Pasteur discovered that bacteria
Here is a basic overview of how to safely load a Midmark autoclave. You will want to be sure and always refer to the appropriate technical documentation also. That is
Every year, there are about 46.5 million surgical procedures performed in the United States. And with these surgical procedures and other medical treatments, there is a lot of equipment used
Benefits of the Tuttnauer EZPlus The Tuttnauer EZPlus Table Top Autoclave is a favorite sterilizer for many reasons. Here we explain a bit about it to help you understand even
