This article contains the medical safety data sheet information for the MBS Simpli Disinfecting Wipes. And if you just want to talk to someone, call our Free Tech Support at 704-966-1650 Option 3.
MBS SIMPLI DISINFECTING WIPES MATERIAL SAFETY DATA SHEET
SECTION 1. IDENTIFICATION
Product Name: MBS Disinfecting Wipes (6.6” x 7.7”, 6” x 6.75”, 8” x 14” and 8” x 6”)
Manufacturer: MBS Medical Technologies; 6750 North Desert Blvd.; El Paso, TX 79912
In Emergency call 911.
For Information about this SDS, contact Chemtrec: 800-424-9300
For information about the product: 888-482-4201
SECTION 2. HAZARDS IDENTIFICATION
Hazard Classifications:
Eye irritation – category 2B
Signal Word(s): Warning
Hazard Statements:
May cause mild eye irritation
Precautionary Statements:
Keep out of reach of children
Precautionary Statements – Response:
Skin contact: No first aid should be needed. If skin irritation persists, get medical attention If in eyes: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
Precautionary Statements – Storage:
No special storage conditions required.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name | Synonym | CAS# | Conc. |
---|---|---|---|
Quaternary ammonium compounds | n-Alkyl-(60% C14, 30% C16, 5% C12, 5% C18) -dimethyl-benzyl-ammonium chlorides | 68391-01-5 | <0.14% |
Quaternary ammonium compounds | n-Alkyl-(68% C12, 32% C14))-dimethyl -ethyl-benzyl ammonium chlorides | 85409-23-0 | <0.14% |
SECTION 4. FIRST-AID MEASURES
After Skin Contact:
No first aid should be needed. Flush skin with plenty of water for 15 minutes while removing contaminated clothing.
After Eye Contact:
Flush eyes with isotonic saline or water for 5 minutes while holding eyelids open. Get medical attention.
After Inhalation:
No first aid is generally required. Move to fresh air, and if breathing is difficult seek medical attention.
After Swallowing:
Do NOT induce vomiting. Rinse out mouth with clean water. Get immediate medical attention.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing agents: use media suitable for surrounding materials.
Special Protective Equipment for firefighters: in the event of a fire, wear protective clothing and a NIOSH-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Avoid contact with eyes.
Measures for environmental protection: Stop spill release if it can be done safely. Prevent spilled materials from entering sewers, storm drains, other unauthorized drainage systems and natural waterways by using sand, earth or other appropriate barriers.
Measures for cleaning/collecting: Sand, clay and absorbent socks can be used to contain a spill.
SECTION 7. HANDLING AND STORAGE
Handling: Wash hands thoroughly after handling. Avoid contact with eyes. Eyewash stations or saline eye washes should be available where material is stored.
Storage: Keep containers tightly closed and properly labeled. Store in cool, dry, well-ventilated areas away from heat, direct sunlight. Store in original or approved containers and protect against physical damage. Keep containers securely sealed to prevent leakage.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Chemical Name | OSHA TWA | NIOSH STEL | ACGIH OEL (TWA) | ACGIH OEL (STEL) |
---|---|---|---|---|
Quaternary ammonium compounds | no data | no data | no data | no data |
Respiratory Protection: none required for normal use.
Skin Protection: none required for normal use.
Eye Protection: none required for normal use.
Appropriate Engineering Controls: none required for normal use.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Form: liquid-soaked wipe
Odor: odorless
Odor threshold: n/a
pH: 5.4 – 5.6
Melting point/melting range: n/a
Boiling point/boiling range: 100°C (212°F) for liquid portion
Flash point: no data available
Evaporation rate: n/a
Flammability: CLOSED CUP: n/a °C (n/a °F) – n/a deg. C (n/a deg. F)
Upper/lower flammability or explosive limits: n/a
Auto ignition temperature: n/a °C (n/a °F)
Vapor pressure: n/a KPa (n/a °C)
Vapor density: n/a (air = 1)
Relative density: 1.00 (water = 1)
Solubility in/Miscibility with water: highly soluble
SECTION 10. STABILITY AND REACTIVITY
Chemical Stability: stable under normal conditions of use
Conditions to avoid: freezing or excessive heat
Incompatible Materials: none currently known
Hazardous Decomposition Products: none
SECTION 11. TOXICOLOGICAL INFORMATION
Potential routes of exposure/potential health effects
Skin: can cause mild skin irritation in sensitive individuals.
Eye: can cause mild eye irritation and redness.
Inhalation: no adverse effects are known.
Ingestion: may be harmful if swallowed.
Carcinogenic effects: no data available.
Mutagenic effects: no data available.
Reproductive toxicity: no data available.
Sensitization: no data available.
Target organs: no data available.
SECTION 12. ECOLOGICAL INFORMATION (non-mandatory)
Ecotoxicity: no data available.
Mobility: no data available.
Biodegradation: no data available.
Bioaccumulation: no data available.
SECTION 13. DISPOSAL CONSIDERATIONS (non-mandatory)
Waste must be disposed of in full compliance with federal, state and local environmental regulations.
SECTION 14. TRANSPORT INFORMATION (non-mandatory)
DOT regulations: : Not regulated
- Hazard class: 0
Special Provisions for Transport: not available.
SECTION 15. REGULATORY INFORMATION (non-mandatory)
US Federal and State Regulations
SARA Section 355 (extremely hazardous substances): none
SARA Section 313 (specific toxic chemical listings): none
Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs): none
Other Classifications:
WHMIS (Canada):
HMIS (U.S.A.):
Health Hazard: none
Fire Hazard: none
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 0
Flammability: 0
Reactivity: 0
SECTION 16. OTHER INFORMATION
SDS date of preparation/update: 16 October 2020 / 20 October 2020
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT.”
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with.
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything.