SciCan’s Gen 4 STATIM® G4 5000 Cassette Autoclave
The Gen 4 SciCan STATIM G4 5000 cassette autoclave is the newest addition to SciCan’s line of STATIM® autoclaves. It offers all the great features of the STATIM 2000, including fast cycle times and a small footprint, and is used with a cassettes that measures an impressive 15” x 7” x 3”. Each cycle averages 9 minutes. The Gen 4 Statim G4 5000 comes with an improved touchscreen display, USB connectivity and remote diagnostics to allow Scican’s rapid response team to quickly identify issues. It also allows you to create multiple user profiles for easy access to your personal settings. You can even set up networking so staff can see what stage each cycle is in from any computer on the network.”
The Gen 4 Statim G4 5000 is a modern upgrade to a wonderful classic. Something that definitely should be on your radar. And we’d like to tell you about it. If you have any questions about this machine or any other questions, contact us at 704-966-1650, option 3 for tech support.
The Gen 4 Statim G4 5000
The Gen 4 Statim G4 5000 Cassette Autoclave is the newest addition to SciCan’s line of STATIM® autoclaves.
The Gen 4 Statim G4 5000 Cassette Autoclave is from SciCan’s line of STATIM® autoclaves. It’s a cassette autoclave, which means it can be used for both medical and dental clinical applications. Use it for brain surgery or to test your latest hypothesis about the origins of life on Earth!
You might be wondering what makes this particular model special compared to the other models available in SciCan’s line-up. Well, there are a few things that set it apart from other models:
- It’s super-fast! The Statim G4 5000 cassette autoclaves can heat up within minutes, so you can get your work done faster than ever before
- It has an intuitive touchscreen interface with easy-to-follow instructions about how much time is needed for different types of samples
- Its sleek design looks great in any healthcare environment
- Low cost of ownership
- Reliability
Cycle Times
Each cycle averages 9 minutes.
You’re busy, I get it. You have a lot going on and not enough time to do everything you need to get done. So, when you finally have the chance to breathe in between patients, you don’t want to spend that time waiting around for your autoclave cycle to finish up.
The good news is that this autoclave has an average cycle time of just 9 minutes unwrapped and 17 minutes wrapped ! That means it can handle everything from dental handpieces to plastics. It also runs faster than other units in its class—which means less time waiting at the countertop or in front of your computer screen while things are heating up or cooling down!
The Upgrade to G4
The Statim G4 comes with an improved touchscreen display, USB connectivity and remote diagnostics. to allow Scican’s rapid response team to quickly identify issues.
The STATIM G4 5000 comes with an improved touchscreen display, USB connectivity and remote diagnostics to allow Scican’s rapid response team to quickly identify issues. The new touch screen allows you to navigate between menus and settings more easily than the previous generation of Statims. This is thanks to the use of SciCan’s G4 technology.
USB connectivity is a great feature for those who want to connect their devices directly to the autoclave without having to use WiFi. This could be useful if your work has limited internet access or it just so happens that you are working in an area where there is limited WiFi coverage (like me here at home).
It also allows you to create multiple user profiles for easy access to your personal settings.
The G4 5000 also allows you to create multiple user profiles for easy access to your personal settings. You can store up to three different settings per user profile, and switch between them with a single touch of the touchscreen display or the front panel buttons.
A USB port is included on the front panel so that you can attach a flash drive or hard drive, which makes it easy to upload data directly from your instrument (no computer required). A remote diagnostics port provides direct communication between your STATIM® G4 Autoclave and service technicians for quicker troubleshooting and faster repairs.
Faster than the Rest
Overall the G4 is up to 44% faster than other STATIM models and reduces water consumption by 85%.
- Fast cycle times
The Gen 4 Statim G4 5000 is a beast, and it shows. The machine boasts an impressive 44% increase of speed and up to 85% decrease in water consumption. That’s right: if you’re tired of waiting around for your cassettes to finish their cycle, this machine has got you covered (and then some).
- Small footprint
If you’ve got limited space in your laboratory or clinic, the STATIM® G4 is sure to fit right into your workspace. This unit stands at 23.6” x 16.1” x 7.5”—a veritable dwarf compared to its older siblings. And did we mention that it weighs less than 75 lbs?
- Data Protection
Patient Safety relies on attention to detail. The 4th Gen Statim G4 supports verifiable processes that are PIN protected with user-defined ID so that staff members can be required to authorize a cycle. This encourages extra attention to process and creates a safer environment for both staff and patients.
The 4th Generation STATIM G4 5000 improves on previous models of the popular family of autoclaves from SciCan!
The new Gen 4 Statim G4 5000 is the latest model in the popular family of autoclaves from SciCan. It improves on previous models with up to 44% faster cycles, reducing water consumption by 85%. Along with improved touchscreen display, USB connectivity and remote diagnostics. The G4 also has multiple user profiles and networking capabilities. Did we mention how fast it is!? Statim’s unmatched speed and dependability have made Statim the words best selling autoclave. Its patented gentle technology has also made STATIM the world’s favorite.
Cassette System
The thin stainless-steel walls of Statim’s fully removable cassette, (or sterilization chamber) allow for rapid heating and cooling of the chamber. As a result, Statim meets the conditions for sterilization and drying. In a fraction of the time required by a conventional autoclave, mind you.
Final Thoughts
With all the improvements made to this model, we’re sure you’ll be impressed with this one. The 4th Generation STATIM G4 5000. It offers fast cycle times (each unwrapped cycle averages 7 minutes and each wrapped cycle averages 12 minutes). Which is up to 44% faster than other STATIM models! The STATIM G4 also comes with an improved touchscreen display, USB connectivity and remote diagnostics. With that, Scican’s rapid response team can quickly identify issues when they arise.
You can set up networking so staff can see what stage each cycle is at. And can be viewed from any computer on the network. Which makes things much easier when running multiple machines in one location. Overall this machine will save time and money while still giving you access to all of your favorite features!
As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT.”
We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with.
You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything.