OPTIM 33TB, 1-minute virucidal and bactericidal for both Canada and the US, and 1-minute tuberculocidal for Canada and 5-minute tuberculocidal for the US. OPTIM 33TB cleaning and disinfecting solution kills germs on services fast, up to 10 times faster than other leading disinfectants. It’s highly effective, and yet OPTIM 33TB is not harmful to you or your patients. The active ingredient biodegrades into oxygen and water. The other ingredients are listed in the FDA, GRAS, and EPA inert substances as well as the CFR 21 safe food additives lists, which makes OPTIM both eco-friendly and people friendly. It’s clean, fast and safe.
Here’s a short summary on how to clean and disinfect more effectively with OPTIM. Before switching to OPTIM, rinse all surfaces with soap and water. After you’ve made the switch to OPTIM, rinse surfaces with water once a week to avoid buildup of surfactant. OPTIM is available in convenient pre-moistened wipes or in liquid form for use with STAT-Wipes or equivalent dry wipes. OPTIM is easy to use. It’s a one-step cleaner disinfectant approved by the Environmental Protection Agency. The EPA has rated OPTIM as a Class IV material, which means that there are no health and safety warnings, caution or danger statements required on the label. There were no chemicals to mix. OPTIM is nonirritating to eyes and skin, nonhazardous, and nonflammable. The active ingredient, hydrogen peroxide, biodegrades so there’s no need for special waste handling. OPTIM 33TB is a potent disinfectant, in only 30 seconds of contact, surfaces are sanitized. In just 1 minute, viruses and bacteria are thoroughly disinfected. When choosing OPTIM 33TB wipes, simply pull out a pre-moistened wipe at a 45-degree angle from the container and close the lid. Then all you do is wipe evenly and thoroughly to clean and disinfect.
If the surface is heavily soiled, discard the wipe after cleaning, then take out a fresh wipe and continue wiping to disinfect the surface. Be sure to leave surface wet for the contact time indicated on the package. OPTIM 33TB solution is just as easy to use. Simply spray the solution onto a dry STAT-Wipe, then wipe the surface evenly and thoroughly to clean and disinfect. If the surface is heavily soiled, spray a second dry STAT-Wipe, and continue wiping to disinfect the surface. Be sure to leave surface wet for the contact time indicated on the package. Here are a few tips to achieve the best results. Be sure to always spray the wipe and not the surface. It’s important not to overspray the wipe so that it doesn’t become too wet. If you’re using gauze dipped in solution for wiping, be sure you wipe dry any areas where you see pooling. For best results, do not over apply the product.
The EPA has rated OPTIM as a Class IV material, which means that there are no health and safety warnings, caution or danger statements required on the label. OPTIM 33TB has been tested and approved in accordance with EPA organic soil load requirement as a one-step cleaner disinfectant. In Canada, OPTIM 33TB is approved by the HPB. Please refer to the original OPTIM 33TB container for complete directions before using. For more information, contact us toll free in the US at 704-966-1650. Or visit our website at StatimUSA.com. OPTIM 33TB, an easy to use one-step cleaner disinfectant that’s clean, fast, and safe from SciCan, your infection control specialist.
If you would like to purchase OPTIM 33TB you can do that here – https://statimusa.com/product-category/optim-33tb/