Troubleshooting a Statim G4 Error Code 4 Leave a comment

In this article, we’ll go over what an Error Code 4 on a Statim G4 is. And if you just want to talk to someone, call our Free Tech Support at 704-966-1650 Option 3.

What does a Statim G4 Error Code 4 mean?

The error code 4 in a Scican Statim G4 means that “The cassette has failed to achieve sterilization conditions within a time-out period of the chamber first reaching110°C.”

This cycle fault error is almost exactly like cycle fault error code 3. It requires some of the same checks when troubleshooting so it will sound a bit familiar.

Where do you start?

The first thing you want to check is to see if the cassette is sealing properly. Look for visible steam leaks in and around the cassette. The seal, lid, and tray will be the parts to check for leaks.

Start by checking the seal.

Open the cassette and ensure that the seal is seated properly. Be certain that the blocks are all in the right place and seated in the corners properly. Check also that there is no twisting, gouges, or kinks in the seal itself.

It is not a bad idea to remove it and reseat it. You want to lubricate the seal with some NON-DETERGENT soap, reseat it, and then put the cassette back together and in, and run another cycle.

Note: If the cassette seal is not replaced every 6 months or 500 cycles, or if it’s not properly maintained with lubricant etcetera, then it has a good chance of failing prematurely. If you are not certain of when your machines were checked or NEED to be checked we can help you with our FREE Preventive Maintenance Program.

If you still have the problem after that we are going to check the lid and tray.

Next check the cassette lid and tray?

Take the lid off the tray and set them both on a flat surface. You can quickly tell if there is any warping in either piece. Be certain to check the side walls and corner for any dents or gouges. If there is anything wrong with the integrity of the cassette lid or tray it will not be able to seal properly.

You can find New Statim G4 Cassettes here.

The cassette is good so what’s next?

If you find the cassette to be working properly and you still get the Error Code 4 then the next step is to check the solenoid.

How to check the solenoid?

A very simple check for a properly working solenoid is to listen as you push the cassette in to a fully seated position. When the cassette goes all the way in you will hear an audible “click”. That click is the solenoid working properly. There should always be a very distinct “click” every time you push the cassette completely in.

If you do not hear that click then the solenoid is sticking for some reason. The coil may be bad, the plunger may be bad, or there might be some dirt that is clogging the system.

For more information you can watch our instructional video on How to disassemble a Solenoid Valve.

And if you need a new Solenoid Valve you can find them here.

Can I Do This Work Myself?

There are only 2 end-user repairs for a Statim G4 Error Code 4. They are going to be the cassette seal and checking the cassette lid and tray.

The Solenoid Valve is listed by Scican as a Field Service Tech Repair. That is something that possibly an end-user could do, but we would recommend you at least contact us and discuss the repair.

What if I have more questions?

As always we want to remind you that we offer FREE TECHNICAL SUPPORT to anyone (even if your not our customer). Please give us a call, email, or chat with us live on our site and we can help you with your problems. We are your “One Stop Shop for All Things Autoclave” and have the knowledge and resources to help you out of situations like a Scican Statim G4 Error Code 4.

You Can Also See Our Videos 0n Other Statim G4 Error Codes Here.

As always if you have any questions about this process or anything else please feel free to contact us and take advantage of our “FREE TECH SUPPORT.”

We also offer FREE VIRTUAL TECH SUPPORT to “See and Talk” with a “Real Time Live Technician” for any problems you may be in need of help with.

You can also use our “FREE MAINTENANCE PROGRAM”. Take the guesswork and worrying about what unit is due for maintenance and which maintenance cycle it is time for. We will keep track of all your autoclaves and let you know when it’s time for anything.