Misc RPI Parts
Showing 49–69 of 69 results
-
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Reservoir Filter Kit PCK167
RPI Part #PCK167
OEM Part #9432311RESERVOIR FILTER KIT
- Male 100-150 micron sintered bronze filter with 3/8-24 female insert.
- Size: .56″ dia x 1.86″ lg
Fits: Fill Coupling Vent/Condenser
Models this part fits: SEE BELOW
SKU: PCK167 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Solid State Controller PCT007
RPI Part #PCT007
OEM Part #019110SOLID STATE CONTROLLER
Includes:
- Solid State Controller (RPI Part #PCT169)
- Controller Board Wire Harness (RPI Part #PCW068)
- Trim Pot may have to be adjusted
Fits: Mounts on bottom plate of machine
Models this part fits: OCM, OCR, OCR+
SKU: PCT007 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI TEMPERATURE GAUGE PCG040
RPI Part #PCG040
OEM Part #3336356 / 015316PRESSURE GAUGE
- Size: 2″ dia.
- Dual Scale: 0 to 60 psi / 0 to 400 kpa
- 1/8″ MPT center back mount
- Material: Stainless steel case and bezel, glass lens
- This part replaces Pressure Gauge (RPI Part #PCG038)
- Includes: Mounting bracket, mounting hardware, and 3/16″ tubing compression adapter fitting
Fits: Control Panel
Models this part fits: SEE BELOW
SKU: PCG040 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI TEMPERATURE GAUGE PCG050
RPI Part #PCG050
OEM Part #4700147TEMPERATURE GAUGE
- Dual scale: 200˚F to 330˚F; 93˚C to 165˚C
- 2′ dia. gauge
- Includes gauge, mounting bracket, and mounting hardware
- Capillary tubing length: 21″
Fits: Control Panel
Models this part fits: SEE BELOW
SKU: PCG050 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Thermistor Assembly PCT008
RPI Part #PCT008
OEM Part #019149THERMISTOR ASSEMBLY
- Rated: 1M ohms @ 25˚ C
- 1/4″ MPT
- Top of chamber near safety relief valve
Fits: Consistent with Solid State Controller (RPI Part #PCT135)
Models this part fits: OCM, OCR, OCR+
SKU: PCT008 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Validator Plus 10 Sterilizer PM Kit PCK223
RPI Part #PCK223
OEM Part #1539407 (Gasket only)/049672STERILIZER PM KIT
- See Notes below for parts included in this Kit
- All parts are also sold separately
- Also includes RPI PM Checklist
- For annual PM of sterilizer or as needed
Models this part fits: Validator Plus 10
SKU: PCK223 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Validator Plus 8 Sterilizer PM Kit PCK222
RPI Part #PCK222
OEM Part #1539241 (Gasket only)/049671STERILIZER PM KIT
- See Notes below for parts included in this Kit
- All parts are also sold separately
- Also includes RPI PM Checklist
- For annual PM of sterilizer or as needed
Models this part fits: Validator Plus 8
SKU: PCK222 -
Misc Parts, Misc RPI Parts, New
Pelton & Crane Safety Valve (38 PSI) RPI Part #AMV097
RPI Part #AMV097
Pelton & Crane Safety Valve (38 PSI)
- Brass; 1/2″ MPT x 1/2″ FPT
- Cracking Pressure: 38 PSI
Fits: Chamber
Model(s) This Part Fits: Delta 10″ (AF), Delta 8″ (AE), Delta Q10, Delta Q8, Delta XL10, Delta XL8, Validator 10 (AA), Validator 8 (AB), Validator Plus 10 (AD), Validator Plus 8 (AC)SKU: AMV097 -
Misc Parts, Misc RPI Parts, New
PM-2 KIT RPI PART SDK059
RPI Part #SDK059
OEM Part #05-53441-1-002APM-2 KIT
- It is recommended that this Kit be replaced every 12 months.
- All parts also sold separately
- Also available: PM-1 Kit (RPI Part #SDK058) – for biannual planned maintenance and Chamber Plastics Kit (RPI Part #SDK037)
Model(s) This Part Fits: SEE BELOW
Part(s) Included: SEE BELOW
SKU: SDK059 -
Misc Parts, Misc RPI Parts, New
SHELF SUPPORT (UPPER) RPI PART SDS039
RPI Part #SDS039
OEM Part #33-52418-0-001 (Shelf Support), 33-52670-0-001 (Shelf Stop)SHELF SUPPORT (UPPER)
- Includes: (2) Shelf support (upper), (2) shelf stop (upper), and mounting hardware
- Included in: Chamber Plastics Kit (RPI Part #SDK037) and PM-2 Kit (RPI Part #SDK059)
- Also available: Electrode Spacer (Side) (RPI Part #SDS056)
Fits: Electrode Assembly
Model(s) This Part Fits: SEE BELOW
SKU: SDS039 -
Misc Parts, Misc RPI Parts, New
SKIN TEMPERATURE PROBE (Disposable) RPI Part #OMP009
RPI Part #OMP009
OEM Part #6600-0873-700SKIN TEMPERATURE PROBE (Disposable) RPI Part #OMP009
- Single use only
- 3 pin connector
- Includes: (10) probes and (10 pieces) Reflective Probe Cover (RPI Part #RPC619)
Fits: Probe Panel
Model(s) This Part Fits: See below
SKU: OMP009 -
-
Misc Parts, Misc RPI Parts, New
Solenoid Valve Repair Kit RPI Part #AMK220
RPI Part #AMK220
OEM Part #764326-478SOLENOID VALVE REPAIR KIT
- Seal Material: EPDM
- Includes all parts as shown
Fits: Steam Manifold S2 and S9
Model(s) This Part Fits:
- Amsco/Steris Century V116
- Amsco/Steris Century V120
SKU: AMK220 -
Misc Parts, Misc RPI Parts, New
Solenoid Valve Repair Kit RPI Part #CSK050
RPI Part #CSK050
OEM Part #54187; P764326-621; 62470303SOLENOID VALVE REPAIR KIT
- For Diaphragm style valve
- Material: Nitrile (Buna-N) seals
- Includes all parts as shown
Fits:
Amsco/Steris: Water Manifold: S4 & S7; Castle/Getinge: Solenoid Valve (OEM Part #517343): valve position 13SV; Matrx/Midmark & Midmark: Only for the RPI Brass Body Solenoid Valve (RPI Part #WCV023)
Model(s) This Part Fits: See below
SKU: CSK050 -
Misc Parts, Misc RPI Parts, New
Steam Trap Assembly RPI Part #AMT187
RPI Part #AMT187
OEM Part #129222-001STEAM TRAP ASSEMBLY
- Port: 1/2″ MPT
- Includes: Steam Trap Assembly Repair Kit (RPI Part #AMK188)
Fits: TR1 Chamber Drain Assembly, TR2 & TR3 Jacket Drain Assembly
Model(s) This Part Fits: See NOTES below
SKU: AMT187 -
-
Misc Parts, Misc RPI Parts, New
STERILE AIR (HEPA) FILTER RPI PART #SSF011
RPI Part #SSF011
OEM Part #A1503; 25-51198-001STERILE AIR (HEPA) FILTER
- 0.2 micron
- Size: 2.60″ OD x 3.80″ lg.
- Ports: 3/8″ FPT
- 75mm filter media capsule
- Included in: PM-2 Kit (RPI Part #SDK003) and PM-2 Kit (RPI Part #SDK060)
Fits: Air Intake Valve
Model(s) This Part Fits: See below
SKU: SSF011 -
-
-
Misc Parts, Misc RPI Parts, New
VACUUM PUMP OIL (NX-LAYBOLD PUMP) RPI PART #RXL034
RPI Part #RXL034
OEM Part #37-00759-003; P764334-644/P764335-529VACUUM PUMP OIL (NX-LAYBOLD PUMP)
- 32 fl. oz./.946 liter bottle
- Molykote L-1668 FM oil
- Includes: Yorker spout
Model(s) This Part Fits: See below
SKU: RXL034
