Statim 2000 Platinum Maintenance Package – Beyond the basics 6 MNTH WARRANTY!
Statim 2000 Platinum Maintenance Package – Beyond the basics
6 MONTH PARTS AND LABOR WARRANTY
$1,647.00
Send us your Statim 2000 and receive the Statim 2000 Platinum Maintenance Package – Beyond the basics
-
- Complete disassembly and cleaning of all components
- Water pump tested and new in-line water filter installed (pump replaced as needed)
- Exhaust valve disassembled and cleaned. The valve’s spring/plunger are replaced if needed
- Boiler is screened for potential problems, then calibrated
- Probe bracket is aligned
- Cassettes are aligned
- Chamber temperature probe is calibrated
- PCB is inspected for burn damage or evidence of overheating and Preventative Maintenance completed
- Check valve is replaced
- Microswitch kit is replaced
- Air Compressor Filter is replaced
- The cassette is cleaned, and a BRAND NEW seal is installed
- Shipping is included (To and From)
- Manufacturer Box is provided if you don’t have one!
- 6 Month Warranty!
Quality Guarantee: In our business model, we take pride in each and every machine that we sell, right down to the last detail. We run our units a minimum of 25 complete cycles during our quality assurance phase. You can rest assured when you are buying from us you are buying QUALITY! DO NOT SETTLE, BUY from the BEST.
Customer Service and Support: Your autoclave is important to your business and you and your business are beyond important to us. If you have issues or general questions, we want you to contact us. Our pre, during and after-sale support team is the best in the business and will assist you through the buying process, proper installation, running a sterilization cycle and thoroughly explain preventative maintenance parts and replacement tips.
| Unit Size : | L 480mm x W 415mm x H 150mm L 19″ x W 16.25″ x H 6″ |
| Cassette Internal Dimensions : | L 280mm x W 180mm x H 35mm L 11″ x W 7″ x H 1.5″ |
| Reservoir Capacity : | 4.0 litres (distilled water) Approximately 40 cycles |
| Weight without water : | 21 kg/46 lbs |
| Power Consumption : | 110-120 V, 60Hz, 1300 W |
Ultra-fast 6 minute unwrapped cycle
- 14 minute wrapped cycle
- Exceptional instrument turnover
- 10 minute Dri-Tecc Drying Technology
- Aseptic transfer of instrument directly to the point-of-use
- Reduced instrument investment
- Prolongs instrument life
The STATIM 2000 Classic boasts a 6-minute cycle, but has the added advantage of employing a fully removable chamber so you can aseptically transport a set of freshly sterilized instruments directly to the procedure area.
The STATIM 2000 is fully automatic. Simply select one of the three sterilization programs and with a single touch of the keypad, begin the cycle. An advanced microprocessor controls all functions and maintains optimal sterilization conditions, from start to finish.
SciCan’s STATIM cassette sterilizers have a biological effectiveness that has been proven in tests for hollow and solid instruments at many internationally recognized institutes in Canada, the United States, and Europe.
The STATIM 2000 is a reliable cassette sterilizer that’s compact enough to fit in procedure areas and fast enough to sterilize jewelry, expensive Lasik, PRK, endoscopic and cataract instruments, including phaco handpieces, between procedures – it can complete an unwrapped sterilization cycle in just six minutes and a wrapped cycle in 14 minutes.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.