rpi parts
Showing 97–144 of 356 results
-
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Delta XL 8 PM Kit PCK231
RPI Part #PCK231
OEM Part #1539241 (Door Gasket only)/049671STERILIZER PM KIT
- See Notes below for parts included in this Kit
- All parts are also sold separately
- Also includes RPI PM Checklist
- For annual PM of sterilizer or as needed
Models this part fits: Delta 8″, Delta Q8, Delta XL8
SKU: PCK231 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Electric Timer (60 Minute) PCT081
RPI Part #PCT081
OEM Part #004531 / 041001ELECTRIC TIMER (60 MINUTE)
- 60 Minutes, No Alert
- 7.5A @ 250VAC / 15A @ 125VAC; 1/4″ Tab
- Shaft: 1/4″ dia. x 1/2″ lg.
- Size: 3-3/16″ x 2-5/8″ x 2-7/16″
- Mount: 3/8-32 x 1/4″ lg. Bushing
- Motor: 230VAC / 60 Hz. (CCW)
Fits: Control Panel
Models this part fits: Magnaclave
SKU: PCT081 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Filter In-line Assembly PCF233
RPI Part #PCF233
OEM Part #040978FILTER IN-LINE ASSEMBLY
- Material: 100 x 100 mesh Stainless Steel screen with wire retainer
- Also included in Sterilizer PM Kits (RPI Part #PCK231 and RPI Part #PCK232)
Fits: Inner Chamber Port
Models this part fits: SEE BELOW
SKU: PCF233 -
-
-
Misc Parts, Misc RPI Parts
Pelton & Crane RPI MagnaClave PM Kit PCK216
RPI Part #PCK216
OEM Part #004497STERILIZER PM KIT
- See Notes below for parts included in this Kit
- All parts are also sold separately
- Also includes RPI PM Checklist
- For annual PM of sterilizer or as needed
Models this part fits: MagnaClave
SKU: PCK216 -
-
Misc Parts, Misc RPI Parts
Pelton & Crane RPI OCM FILTER FILL LINE PCF009
RPI Part #PCF009
OEM Part #P129357645/1881031/004326FILTER (FILL LINE)
- Material: 100-150 micron sintered bronze filter
- Size: .56″ dia x 1.86″ lg
- Also available: Fill Vent Tube (RPI Part #PCT013) and Fill Chamber Tube (RPI Part #PCT010)
Fits: Fill (Chamber) Tube
Models this part fits: SEE BELOW
SKU: PCF009 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI OCM Heating Element PCH024
RPI Part #PCH024
OEM Part #014601HEATING ELEMENT
- 1250W, 120VAC, ~12ohms
- Sheathing: Electrogalvanized Sheet Steel
- Includes heating element, hardware, and (3 ft) 14 AWG White Wire-High Temp (RPI Part #RPW086)
- Heater has flip-up tab to mount overtemp switch
Fits: Chamber
Models this part fits: SEE BELOW
SKU: PCH024 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI OCM Heating Element PCH048
RPI Part #PCH048
OEM Part #(OEM Part # Not Available)HEATING ELEMENT
- 1250W, 120VAC, ~12ohms
- Sheathing: Electrogalvanized Sheet Steel
- Includes heating element, hardware, and (3 ft) 14 AWG White Wire-High Temp (RPI Part #RPW086)
- Heater has flip-up tab to mount overtemp switch
Fits: Chamber
Models this part fits: SEE BELOW
Serial #’s this part fits: SEE BELOW
SKU: PCH048 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI OCM PM Kit PCK218
RPI Part #PCK218
OEM Part #004014 (Door Gasket only)STERILIZER PM KIT
- See Notes below for parts included in this Kit
- All parts are also sold separately
- Also includes RPI PM Checklist
- For annual PM of sterilizer or as needed
Models this part fits: OCM
SKU: PCK218 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI OCR Drain Tube PCT146
RPI Part #PCT146
OEM Part #004397DRAIN TUBE
- Includes drain tube and compression fitting
- Also needed when replacing Drain Tube is Drain Tube Cap (RPI Part #PCC119)
- See below for Serial #’s this part fits
Fits: Reservoir
Models this part fits: OCR, OCR+
SERIAL #’s THIS PART FITS:
- OCR Serial #5671 and above.
SKU: PCT146 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI OCR Heating Element PCH023
RPI Part #PCH023
OEM Part #014603HEATING ELEMENT
- 1600W, 120V, ~9ohms
- Sheathing: Electrogalvanized Sheet Steel
- Includes heating element, hardware, and (3 ft) 14 AWG White Wire-High Temp (RPI Part #RPW086)
- Heater has flip-up tab to mount overtemp switch
Fits: Chamber
Models this part fits: SEE BELOW
SKU: PCH023 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Power Cord w/o Connectors 13A @125VAC, 8ft PCC004
RPI Part #PCC004
OEM Part #9390401 / 004288 / 33071 / 6001C / H98159POWER CORD WITHOUT CONNECTORS (13A @ 125VAC, 8 ft.)
- Length: 8 ft.; Color: Black
- 16/3 SJTW; 105°C; 13A @ 125VAC
- Plug Type: NEMA 5-15P
- Connector Type: None; .350″ OD cord
Fits: Back Panel / Motor Pump / Lower Chassis
Models this part fits: See Full List Here
SKU: PCC004 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Reservoir Filter Kit PCK167
RPI Part #PCK167
OEM Part #9432311RESERVOIR FILTER KIT
- Male 100-150 micron sintered bronze filter with 3/8-24 female insert.
- Size: .56″ dia x 1.86″ lg
Fits: Fill Coupling Vent/Condenser
Models this part fits: SEE BELOW
SKU: PCK167 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Solid State Controller PCT007
RPI Part #PCT007
OEM Part #019110SOLID STATE CONTROLLER
Includes:
- Solid State Controller (RPI Part #PCT169)
- Controller Board Wire Harness (RPI Part #PCW068)
- Trim Pot may have to be adjusted
Fits: Mounts on bottom plate of machine
Models this part fits: OCM, OCR, OCR+
SKU: PCT007 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI TEMPERATURE GAUGE PCG040
RPI Part #PCG040
OEM Part #3336356 / 015316PRESSURE GAUGE
- Size: 2″ dia.
- Dual Scale: 0 to 60 psi / 0 to 400 kpa
- 1/8″ MPT center back mount
- Material: Stainless steel case and bezel, glass lens
- This part replaces Pressure Gauge (RPI Part #PCG038)
- Includes: Mounting bracket, mounting hardware, and 3/16″ tubing compression adapter fitting
Fits: Control Panel
Models this part fits: SEE BELOW
SKU: PCG040 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI TEMPERATURE GAUGE PCG050
RPI Part #PCG050
OEM Part #4700147TEMPERATURE GAUGE
- Dual scale: 200˚F to 330˚F; 93˚C to 165˚C
- 2′ dia. gauge
- Includes gauge, mounting bracket, and mounting hardware
- Capillary tubing length: 21″
Fits: Control Panel
Models this part fits: SEE BELOW
SKU: PCG050 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Thermistor Assembly PCT008
RPI Part #PCT008
OEM Part #019149THERMISTOR ASSEMBLY
- Rated: 1M ohms @ 25˚ C
- 1/4″ MPT
- Top of chamber near safety relief valve
Fits: Consistent with Solid State Controller (RPI Part #PCT135)
Models this part fits: OCM, OCR, OCR+
SKU: PCT008 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Validator Plus 10 Sterilizer PM Kit PCK223
RPI Part #PCK223
OEM Part #1539407 (Gasket only)/049672STERILIZER PM KIT
- See Notes below for parts included in this Kit
- All parts are also sold separately
- Also includes RPI PM Checklist
- For annual PM of sterilizer or as needed
Models this part fits: Validator Plus 10
SKU: PCK223 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI Validator Plus 8 Sterilizer PM Kit PCK222
RPI Part #PCK222
OEM Part #1539241 (Gasket only)/049671STERILIZER PM KIT
- See Notes below for parts included in this Kit
- All parts are also sold separately
- Also includes RPI PM Checklist
- For annual PM of sterilizer or as needed
Models this part fits: Validator Plus 8
SKU: PCK222 -
Misc Parts, Misc RPI Parts, New
Pelton & Crane Safety Valve (38 PSI) RPI Part #AMV097
RPI Part #AMV097
Pelton & Crane Safety Valve (38 PSI)
- Brass; 1/2″ MPT x 1/2″ FPT
- Cracking Pressure: 38 PSI
Fits: Chamber
Model(s) This Part Fits: Delta 10″ (AF), Delta 8″ (AE), Delta Q10, Delta Q8, Delta XL10, Delta XL8, Validator 10 (AA), Validator 8 (AB), Validator Plus 10 (AD), Validator Plus 8 (AC)SKU: AMV097 -
Misc Parts, Misc RPI Parts, New
PM-2 KIT RPI PART SDK059
RPI Part #SDK059
OEM Part #05-53441-1-002APM-2 KIT
- It is recommended that this Kit be replaced every 12 months.
- All parts also sold separately
- Also available: PM-1 Kit (RPI Part #SDK058) – for biannual planned maintenance and Chamber Plastics Kit (RPI Part #SDK037)
Model(s) This Part Fits: SEE BELOW
Part(s) Included: SEE BELOW
SKU: SDK059 -
Statim 2000 Parts (RPI), Statim 5000 Parts (RPI), Statim G4 2000 Parts RPI, Statim G4 5000 Parts RPI, New
RPI CONDENSER WASTE BOTTLE KIT #SCK016
Statim 2000 Parts (RPI), Statim 5000 Parts (RPI), Statim G4 2000 Parts RPI, Statim G4 5000 Parts RPI, NewRPI CONDENSER WASTE BOTTLE KIT #SCK016
FREE SHIPPING!!!
(1) New – RPI CONDENSER WASTE BOTTLE KIT #SCK016 OEM #01-100812S
1 gallon capacity; Material: Polypropylene
- Self-contained reservoir assembly
- Comes completely assembled – simply connect the exhaust tube.
SKU: SCK016 -
Statim 2000 Parts (RPI)
Scican Statim 2000 AIR COMPRESSOR KIT RPI Part #SCK020 OEM Part #01-100560S
RPI Part #SCK020
OEM Part #01-100560SAIR COMPRESSOR KIT
- 28mA @ 115VAC; 50/60 HZ.
- Rated air flow: 0.177 cfm
- Rated pressure: 2.84 PSI
- Wire leads: #22 AWG x 22” long
- See Notes: below
Fits: Chassis
Model(s) This Part Fits: Statim 2000, Statim G4 2000Notes:
Service Tip #1: A leaky check valve can cause moisture or steam to seep inside a compressor thus causing the compressor to fail. To avoid this problem, replace the check valve when replacing the compressor and replace the check valve every 2 years.
Service Tip #2: – The OEM recommends replacing the Compressor Filters every 6 months or every 500 cycles (whichever comes first).
The RPI Advantage – The RPI tubing in the Check Valve Kit (RPI Part #SCK011) is translucent – making it easy to see a leaky check valve. For your convenience, RPI includes a check valve in the Air Compressor Kit (RPI Part #SCK020)!
Includes:
- Air Compressor
- Check Valve Kit (RPI Part #SCK011)
- Cable Ties (RPI Part #RPT083)
- Air Compressor Filter (RPI Part #SCF002) installed
- Mounting hardware
SKU: SCK020 -
New, Statim 2000 Parts (RPI)
Scican Statim 2000 BUBBLE LEVEL RPI Part #SCL012 OEM Part #01-100684S (Kit)
New, Statim 2000 Parts (RPI)Scican Statim 2000 BUBBLE LEVEL RPI Part #SCL012 OEM Part #01-100684S (Kit)
RPI Part #SCL012
OEM Part #01-100684S (Kit)BUBBLE LEVEL
- 1″ in dia. x 0.44″ tall with three #2 mounting holes
- Material: black plastic housing, glass window
- Includes Bubble Level Only
Fits: Housing Assembly
Model This Part Fits: Statim 2000SKU: SCL012-2000 -
New, Statim 2000 Parts (RPI)
Scican Statim 2000 CASSETTE SEAL RPI Part #SCS001 OEM Part #01-100028S
RPI Part #SCS001
OEM Part #01-100028SCASSETTE SEAL
- Material: Black silicone
- Size: ~7-3/4″ x 11-3/4″
- Includes: Cassette Seal and (4 pouches) Liquid Soap (RPI Part #RPS287)
- See Notes below for “PM Service Tip”
Fits: Cassette lid
Model(s) This Part Fits: Statim 2000, Statim G4 2000Notes:
PM Service Tip: lube Cassette Seal (RPI Part #SCS001) with (1) pouch of Liquid Soap (RPI Part #RPS287) every 30 days. The OEM recommends replacing the Cassette Seal every 6 months or every 500 cycles (whichever comes first).
SKU: SCS001 -
New, Statim 2000 Parts (RPI)
Scican Statim 2000 CHECK VALVE KIT RPI Part #SCK011 OEM OEM Part #01-100574S/01-1016275/9442740
New, Statim 2000 Parts (RPI)Scican Statim 2000 CHECK VALVE KIT RPI Part #SCK011 OEM OEM Part #01-100574S/01-1016275/9442740
RPI Part #SCK011
OEM Part #01-100574S/01-1016275/9442740CHECK VALVE KIT
- 1/8″ FPT
- Material: Brass
- High temperature seals
- 3/16” brass barb fitting (installed)
- See Notes below
Fits: Steam Generator/Boiler to the Air Compressor
Model(s) This Part Fits: Statim 2000, Statim G4 2000Notes:
Service Tip: A leaky check valve can cause moisture or steam to seep inside a compressor thus causing the compressor to fail. To avoid this problem, replace the check valve when replacing the compressor and replace the check valve every 2 years.
The RPI Advantage – The RPI tubing in the Check Valve Kit is translucent – making it easy to see a leaky check valve.
Includes:
- Check Valve
- (2x) Cable Ties (High Temp) (RPI Part #RPT480)
- Silicone Tubing (RPI Part #RPT373)
- Brass Fitting (installed)
- Threadlocker 545 (RPI Part #RPA369
SKU: SCK011-2000 -
New, Statim 2000 Parts (RPI)
Scican Statim 2000 COIL (SOLENOID VALVE) RPI Part #SCC005 OEM Part #01-104303S
New, Statim 2000 Parts (RPI)Scican Statim 2000 COIL (SOLENOID VALVE) RPI Part #SCC005 OEM Part #01-104303S
RPI Part #SCC005
OEM Part #01-104303SCOIL (SOLENOID VALVE)
- 120/110VAC 50/60 Hz., 9W; lg.; 23-1/2″ lg. #22 AWG Teflon® wires
- Also available: Solenoid Valve (RPI Part #SCV064) and Solenoid Valve Repair Kit (RPI Part #SCK003)
Fits: RPI and the OEM’s Solenoid Valve
Model(s) This Part Fits: Statim 2000, Statim 5000, Statim G4 2000, Statim G4 5000SKU: SCC005-2000 -
New, Statim 2000 Parts (RPI)
Scican Statim 2000 COPPER TUBING KIT RPI Part #SCK048 OEM Part #01-109128S
New, Statim 2000 Parts (RPI)Scican Statim 2000 COPPER TUBING KIT RPI Part #SCK048 OEM Part #01-109128S
RPI Part #SCK048
OEM Part #01-109128SCOPPER TUBING KIT
- Includes: (4 pcs) Compression Sleeve (RPI Part #RPF215), (4 pcs) Compression Nut (RPI Part #RPF219), (4) 3/16″ OD formed tubing
Fits: Probe Bracket to Boiler, Solenoid Valve and Alex Upgrade Kit
Model(s) This Part Fits: Statim 2000, Statim G4 2000SKU: SCK048 -
New, Statim 2000 Parts (RPI)
Scican Statim 2000 DRAIN KIT WITH PUMP FILTER RPI Part #SCK037 OEM Part #01-108152S (kit) & 01-106637S (Water Filter)
New, Statim 2000 Parts (RPI)Scican Statim 2000 DRAIN KIT WITH PUMP FILTER RPI Part #SCK037 OEM Part #01-108152S (kit) & 01-106637S (Water Filter)
RPI Part #SCK037
OEM Part #01-108152S (kit) & 01-106637S (Water Filter)DRAIN KIT WITH PUMP FILTER
- See Notes below for parts included in this kit
- See Notes below for “The RPI Advantage”
- PM Service Tip – The OEM recommends replacing the filter every 6 months or every 500 cycles (whichever comes first).
- Also available: Drain Tube Assembly (RPI Part #RPK432)
Fits: From the Reservoir to the Pump Filter to the Pump to the Drain Line
Model(s) This Part Fits: Statim 2000Notes: To upgrade the Scican Statim® 5000, order the Drain Tubing Kit (RPI Part #RPK432) and the Female Quick Disconnect Fitting (RPI Part #RPF428). The Statim 5000 comes equipped with the drain Line and Plug.
The RPI Advantage – The need for Pump Filter replacement is easily detected with RPI’s Clear Tubing and Filter. Draining is simplified with the addition of our Quick Disconnect System – Just Attach the tubing and you are ready to drain.
Includes:
- Cord Clip (RPI Part #ADC058)
- Barb Tee (RPI Part #RPB703)
- Cable Clamp (RPI Part #RPC701)
- Cable Holder (RPI Part #RPC702)
- Cable Tie (3 pieces) (RPI Part #RPT083)
- Drain Tubing Kit (RPI Part #RPK432)
- Female Quick Disconnect Fitting (RPI Part #RPF428)
- Hex Nut (RPI Part #RPH111)
- Silicone Tubing (RPI Part #RPT373)
- Water Filter (In-Line) (RPI Part #SCF034)
SKU: SCK037 -
New, Statim 2000 Parts (RPI)
Scican Statim 2000 DRAIN TUBE ASSEMBLY KIT (SMALL) RPI Part #RPK432 OEM 3003683
New, Statim 2000 Parts (RPI)Scican Statim 2000 DRAIN TUBE ASSEMBLY KIT (SMALL) RPI Part #RPK432 OEM 3003683
RPI Part #RPK432
OEM Part #3003683DRAIN TUBE ASSEMBLY KIT (SMALL)
- Fitting: Acetal; Tubing: Clear Polyethylene (.25 O.D. x .035 Wall);~50″ lg.
- See Notes below for parts included in this kit
- Also included in: Drain Kit With Pump Filter (RPI Part #SCK037)
Fits: Front Panel/Female Quick Connect Fitting-White (RPI Part #RPF428)
Model(s) This Part Fits: Statim 2000Notes:
Includes:
- Quick Connect Male Fitting – White (RPI Part #RPF429)
- O-Ring (RPI Part #RPO306)
- (~50″ piece) Tubing (RPI Part #RPT276)
SKU: RPK432 -
New, Statim 2000 Parts (RPI)
Scican Statim 2000 EXHAUST TUBING KIT RPI Part #SCK017 OEM Part #01-100204S
New, Statim 2000 Parts (RPI)Scican Statim 2000 EXHAUST TUBING KIT RPI Part #SCK017 OEM Part #01-100204S
RPI Part #SCK017
OEM Part #01-100204SEXHAUST TUBING KIT
- Includes: 8′ of Exhaust Tubing (RPI Part #RPT380) and (5 pcs) Cord Clip (RPI Part #ADC058)
- Tubing Size: 8 ft. lg; Nylon®; .250″ OD X .170″ ID
- Also included in: Condenser Waste Bottle Kit (RPI Part #SCK016)
- See Important Note below regarding the In-Line Quick Connect (RPI Part #RPF371)
Fits: Solenoid Valve Fitting to Waste Bottle Fitting
Model(s) This Part Fits: Statim 2000, Statim G4 2000Notes:
Also Available:
- In-Line Quick Disconnect (RPI Part #RPF371)
- Exhaust Tubing (RPI Part #RPT380)
- Push-In Elbow Fitting (RPI Part #RPF363)
Important Note The In-Line Quick Disconnect (RPI Part #RPF371) will not function properly with the OEM Teflon® Tubing. Only use with the supplied Nylon® Tubing (RPI Part #RPT380).
SKU: SCK017-2000
