RPI
Showing 433–480 of 630 results
-
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E 600W 230V Heating Element RPI Part #TUH148
RPI Part #TUH148
OEM Part #01720028
Old OEM Part #HEA009-0007Tuttnauer 3850E Heating Element
- All parts also sold separately
- Note: Air Jet Valve included in this Kit is the Black Top (RPI Part #TUJ034)
Includes:
- 600W, 230V, ~88Ω
- Material: Heater mounting strap is stainless steel. Heater section is copper.
- Includes: Heater Hardware (RPI Part #TUH052)
SKU: TUH148-3850E -
-
3850E Parts, New, Tuttnauer Parts RPI
Tuttnauer 3850E AIR JET VALVE (RED TOP) RPI Part #TUJ033
RPI Part #TUJ033
OEM Part #CB8420103850E AIR JET VALVE (RED TOP)
- 1/4-28 thread
- Known as Red top
- 10 mm hex
- Stainless steel
- See Notes below
Fits: Safety Valve Holder
Included in:
- Safety Valve Holder Kit (RPI Part #TUK053)
- Safety Valve Holder Kit (RPI Part #TUK077)
- Sterilizer PM Kit (RPI Part #TUK122)
- Sterilizer PM Kit (RPI Part #TUK126)
- Sterilizer PM Kit (RPI Part #TUK127)
- Sterilizer PM Kit (RPI Part #TUK129)
- Sterilizer PM Kit (RPI Part #TUK130)
- Sterilizer PM Kit (RPI Part #TUK131)
- Sterilizer PM Kit (RPI Part #TUK132)
More Tuttnauer 3850E Parts Available→
SKU: TUJ033-3850E -
3850E Parts, Tuttnauer, Tuttnauer Parts RPI
Tuttnauer 3850E DOOR SWITCH ACTIVATOR RPI Part #TUA066
RPI Part #TUA066
OEM Part #CT312036Tuttnauer 3850E DOOR SWITCH ACTIVATOR
- Use to adjust the door switch activation
- Includes all parts as shown
- Also available: Door Switch (RPI Part #TUS014) and Rubber Boot for Door Switch (RPI Part #TUB072)
Fits: Door
More Tuttnauer 3850E Parts Available→
SKU: TUA066-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E ELBOW FITTING (5/16″ TUBE x 1/4″ MPT) RPI Part #RPF716
3850E Parts, Tuttnauer Parts RPITuttnauer 3850E ELBOW FITTING (5/16″ TUBE x 1/4″ MPT) RPI Part #RPF716
RPI Part #RPF716
OEM Part #03012705/FIT100-03093850E ELBOW FITTING (5/16″ TUBE X 1/4″ MPT)
- Material: Brass
- Included in: Fill/Vent Valve Upgrade Assembly (RPI Part #AMA274), Multi-Purpose Valve Assembly (RPI Part #TUV025), Multi-Purpose Valve (RPI Part #TUV097), and Multi-Purpose Valve (RPI Part #TUV098)
Fits: Chamber Fill Port
SKU: RPF716-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E FUSE HOLDER RPI Part #RPH659
RPI Part #RPH659
OEM Part #019101033850E FUSE HOLDER
- 3/16″ Quick Connect Tabs
- Uses standard 3AG (1/4″ dia. x 1-1/4″ lg.) fuse
- 20A @ 250VAC
- Low profile screwdriver slot knob
- Suggested mounting hole size: 1/2″
- Includes mounting hardware
Fits: Rear Panel
More Tuttnauer 3850E Parts Available→
SKU: RPH659-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E GUAGE GUARD RPI Part #RPG694
RPI Part #RPG694
3850E GUAGE GUARD
- Soft rubber; Color: Blue
- Included in: Test Pressure Gauge (RPI Part #RPG461)
Fits: Test Pressure Gauge (RPI Part #RPG693) & Most 2-1/2″ Pressure/Vacuum Gauges with Bottom or Center Mount Port
SKU: RPG694-3850E -
-
3850E Parts, New, Tuttnauer, Tuttnauer Parts RPI
Tuttnauer 3850E PC BOARD (AJUNC-3) RPI Part #TUB154
RPI Part #TUB154
OEM Part #03700029Tuttnauer 3850E PC BOARD (AJUNC-3)
- This board MUST be calibrated upon installation. For the tools and detailed instructions needed to calibrate this board, we recommend using the RPI Diagnostic Smart Kit® (RPI Part #TUK108).
- Also available: Pressure Transducer (RPI Part #TUT092) and Temp Sensor (PT-100) (RPI Part #TUS093) and Ribbon Cable (RPI Part #TUC144)
Fits: Electronics Bay
More Tuttnauer 3850E Parts Available→
SKU: TUB154-3850E -
3850E Parts, PM Kits, Tuttnauer Parts RPI
Tuttnauer 3850E PM KIT RPI Part #TUK131
RPI Part #TUK131
OEM Part #02610019 (Door Gasket only)3850E STERILIZER PM KIT
- SEE BELOW for parts included in this Kit
- All parts also sold separately
- Note that the Air Jet Valve included in this Kit has the RED Top (RPI Part #TUJ033)
- Also includes RPI PM Checklist
Model(s) This Part Fits: SEE BELOW
SKU: TUK131-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E POWER SWITCH RPI Part #TUS009
RPI Part #TUS009
OEM Part #01910172TUTTNAUER 3850E POWER SWITCH
- Rocker switch (On-Off), Legend: I/O; Green lens
- 20A @ 125/250VAC; DPST
- Panel Cutout: 1.185″ x .874″; 1/4″ Tabs
Fits: Main Housing
More Tuttnauer 3850E Parts Available→
SKU: TUS009-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E RPI Heater Hardware RPI Part #TUH052
RPI Part #TUH052
3850E Heater Hardware
Includes:
- 1/4-20 x 2″ lg. cap screw
- (2) #10 Ring Terminal #12-10 awg.
- (2) #10 ring terminal #16-14 awg.
- (4) #10 flat washer
- (2) hex nut #10-24
- barrel nut 1/4-20
- detent barrel slug
Fits: Heating Element
SKU: TUH052-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E RPI Swivel Elbow (6MM BARB x 1/8″ MALE BSPP) RPF811
RPI Part #RPF811
OEM Part #FIT 100-08213850E SWIVEL ELBOW (6MM BARB x 1/8″ MALE BSPP)
- Material: Nickel Plated Brass
- Includes: Sealing O-Ring
- Not suitable for use in continuously rotating or gyrating applications
- Included in: Water pumps (RPI Part #TUP089 and RPI Part #TUP090)
Fits: 3/16″ (6mm) I.D. Tubing, 1/8″ Female BSPP Port, and Water Pumps
SKU: RPF811-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E SOLENOID VALVE (6mm) RPI Part #TUV085
RPI Part #TUV085
OEM Part #018101033850E SOLENOID VALVE (6mm)
- 6mm orifice
- Ports: 1/4 FPT
- Material: Brass body; EPDM plunger seat
- 12VDC; 12W
- Includes: 12VDC; 12W Magnetic Coil (RPI Part #TUC087), Plunger Valve Kit (RPI Part #TUK086) and Wire Connector w/Gasket (RPI Part #TUC084)
Fits:
- Water Pump Valve on models EZ9, EZ10 & EZ10k
- Manifold Fill Valve on Models 1730E/EK, 2340E/EK, 2540E/EK & 3870E
SKU: TUV085-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E TUBE ADAPTER RPI Part #RPG694
RPI Part #RPF689
3850E TUBE ADAPTER (3/16″ TUBE X 1/4″ MPT)
- 1/4 MPT x 3/16″ Compression Tube
- Material: Brass
- Includes: (1) piece each: Compression Nut (RPI Part #RPF219) and Compression Sleeve (RPI Part #RPF215)
Fits: Pressure Gauge (Test)
SKU: RPF689-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E WATER FILL ELECTRODE RPI Part #TUE080
RPI Part #TUE080
OEM Part #CB9300403850E WATER FILL ELECTRODE
- 58mm long; 3/16″ tab
- Includes Ferrule (RPI Part #TUF096) and Compression Nut (RPI Part #RPF220)
Fits: Chamber
More Tuttnauer 3850E Parts Available→
SKU: TUE080-3850E -
-
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E WIRE HARNESS (No.1) RPI Part #TUH111
RPI Part #TUH111
3850E WIRE HARNESS (No. 1)
- Small-sized 2 Pin Connector without jumper
- 23″ lg.; Red and Black wiring (twisted)
- Two conductor wire connector with #8 Spade Terminals
- Use with Simulator (PT100) (RPI Part #TUT114)
- Also included in the Diagnostic Smart Kit® (RPI Part #TUK108)
SKU: TUH111-3850E -
3850E Parts, Tuttnauer Parts RPI
Tuttnauer 3850E WIRE HARNESS (No.3) RPI Part #TUH113
RPI Part #TUH113
3850E WIRE HARNESS (No. 3)
- Large-sized 3 Pin Connector with jumper
- 23″ lg.; Red and Black wiring (twisted)
- Three conductor wire connector with jumper, #8 Spade Terminals
- Use with Simulator (PT100) (RPI Part #TUT114)
- Also included in the Diagnostic Smart Kit® (RPI Part #TUK108)
SKU: TUH113-3850E -
3850EA Parts, Tuttnauer Parts RPI
Tuttnauer 3850EA 600W 230V Heating Element RPI Part #TUH148
RPI Part #TUH148
OEM Part #01720028
Old OEM Part #HEA009-0007Tuttnauer 3850EA Heating Element
- All parts also sold separately
- Note: Air Jet Valve included in this Kit is the Black Top (RPI Part #TUJ034)
Includes:
- 600W, 230V, ~88Ω
- Material: Heater mounting strap is stainless steel. Heater section is copper.
- Includes: Heater Hardware (RPI Part #TUH052)
SKU: TUH148-3850EA -
3850EA Parts, Tuttnauer Parts RPI
Tuttnauer 3850EA GUAGE GUARD RPI Part #RPG694
RPI Part #RPG694
3850EA GUAGE GUARD
- Soft rubber; Color: Blue
- Included in: Test Pressure Gauge (RPI Part #RPG461)
Fits: Test Pressure Gauge (RPI Part #RPG693) & Most 2-1/2″ Pressure/Vacuum Gauges with Bottom or Center Mount Port
SKU: RPG694-3850EA -
3850EA Parts, Tuttnauer Parts RPI
Tuttnauer 3850EA MALE CONNECTOR (3/16″ x 1/4″ MPT) RPI Part #RPF688
-
3850EA Parts, Tuttnauer Parts RPI
Tuttnauer 3850EA RPI Swivel Elbow (6MM BARB x 1/8″ MALE BSPP) RPF811
3850EA Parts, Tuttnauer Parts RPITuttnauer 3850EA RPI Swivel Elbow (6MM BARB x 1/8″ MALE BSPP) RPF811
RPI Part #RPF811
OEM Part #FIT 100-08213850EA SWIVEL ELBOW (6MM BARB x 1/8″ MALE BSPP)
- Material: Nickel Plated Brass
- Includes: Sealing O-Ring
- Not suitable for use in continuously rotating or gyrating applications
- Included in: Water pumps (RPI Part #TUP089 and RPI Part #TUP090)
Fits: 3/16″ (6mm) I.D. Tubing, 1/8″ Female BSPP Port, and Water Pumps
SKU: RPF811-3850EA -
3850EA Parts, Tuttnauer Parts RPI
Tuttnauer 3850EA SOLENOID VALVE (6mm) RPI Part #TUV085
RPI Part #TUV085
OEM Part #018101033850EA SOLENOID VALVE (6mm)
- 6mm orifice
- Ports: 1/4 FPT
- Material: Brass body; EPDM plunger seat
- 12VDC; 12W
- Includes: 12VDC; 12W Magnetic Coil (RPI Part #TUC087), Plunger Valve Kit (RPI Part #TUK086) and Wire Connector w/Gasket (RPI Part #TUC084)
Fits:
- Water Pump Valve on models EZ9, EZ10 & EZ10k
- Manifold Fill Valve on Models 1730E/EK, 2340E/EK, 2540E/EK & 3870E
SKU: TUV085-3850EA -
3850EA Parts, Tuttnauer Parts RPI
Tuttnauer 3850EA TUBE ADAPTER RPI Part #RPG694
RPI Part #RPF689
3850EA TUBE ADAPTER (3/16″ TUBE X 1/4″ MPT)
- 1/4 MPT x 3/16″ Compression Tube
- Material: Brass
- Includes: (1) piece each: Compression Nut (RPI Part #RPF219) and Compression Sleeve (RPI Part #RPF215)
Fits: Pressure Gauge (Test)
SKU: RPF689-3850EA -
3850EA Parts, Tuttnauer Parts RPI
Tuttnauer 3850EA WATER FILL ELECTRODE RPI Part #TUE080
RPI Part #TUE080
OEM Part #CB9300403850EA WATER FILL ELECTRODE
- 58mm long; 3/16″ tab
- Includes Ferrule (RPI Part #TUF096) and Compression Nut (RPI Part #RPF220)
Fits: Chamber
More Tuttnauer 3850EA Parts Available→
SKU: TUE080-3850EA -
3850EHS Parts, Tuttnauer Parts RPI
Tuttnauer 3850EHS GUAGE GUARD RPI Part #RPG694
RPI Part #RPG694
3850EHS GUAGE GUARD
- Soft rubber; Color: Blue
- Included in: Test Pressure Gauge (RPI Part #RPG461)
Fits: Test Pressure Gauge (RPI Part #RPG693) & Most 2-1/2″ Pressure/Vacuum Gauges with Bottom or Center Mount Port
SKU: RPG694-3850EHS -
3850EHS Parts, Tuttnauer Parts RPI
Tuttnauer 3850EHS RPI Swivel Elbow (6MM BARB x 1/8″ MALE BSPP) RPF811
3850EHS Parts, Tuttnauer Parts RPITuttnauer 3850EHS RPI Swivel Elbow (6MM BARB x 1/8″ MALE BSPP) RPF811
RPI Part #RPF811
OEM Part #FIT 100-08213850EHS SWIVEL ELBOW (6MM BARB x 1/8″ MALE BSPP)
- Material: Nickel Plated Brass
- Includes: Sealing O-Ring
- Not suitable for use in continuously rotating or gyrating applications
- Included in: Water pumps (RPI Part #TUP089 and RPI Part #TUP090)
Fits: 3/16″ (6mm) I.D. Tubing, 1/8″ Female BSPP Port, and Water Pumps
SKU: RPF811-3850EHS -
3850M Parts, Tuttnauer Parts RPI
Tuttnauer 3850M GUAGE GUARD RPI Part #RPG694
RPI Part #RPG694
3850M GUAGE GUARD
- Soft rubber; Color: Blue
- Included in: Test Pressure Gauge (RPI Part #RPG461)
Fits: Test Pressure Gauge (RPI Part #RPG693) & Most 2-1/2″ Pressure/Vacuum Gauges with Bottom or Center Mount Port
SKU: RPG694-3850M -
-
3850M Parts, PM Kits, Tuttnauer Parts RPI
Tuttnauer 3850M PM KIT RPI Part #TUK131
RPI Part #TUK131
OEM Part #02610019 (Door Gasket only)3850M STERILIZER PM KIT
- SEE BELOW for parts included in this Kit
- All parts also sold separately
- Note that the Air Jet Valve included in this Kit has the RED Top (RPI Part #TUJ033)
- Also includes RPI PM Checklist
Model(s) This Part Fits: SEE BELOW
SKU: TUK131-3850M -
3850M Parts, Tuttnauer Parts RPI
Tuttnauer 3850M TUBE ADAPTER RPI Part #RPG694
RPI Part #RPF689
3850M TUBE ADAPTER (3/16″ TUBE X 1/4″ MPT)
- 1/4 MPT x 3/16″ Compression Tube
- Material: Brass
- Includes: (1) piece each: Compression Nut (RPI Part #RPF219) and Compression Sleeve (RPI Part #RPF215)
Fits: Pressure Gauge (Test)
SKU: RPF689-3850M -
-
3870E Parts (RPI), New, Tuttnauer Parts RPI
Tuttnauer 3870E AIR JET VALVE (RED TOP) RPI Part #TUJ033
RPI Part #TUJ033
OEM Part #CB8420103870E AIR JET VALVE (RED TOP)
- 1/4-28 thread
- Known as Red top
- 10 mm hex
- Stainless steel
- See Notes below
Fits: Safety Valve Holder
Included in:
- Safety Valve Holder Kit (RPI Part #TUK053)
- Safety Valve Holder Kit (RPI Part #TUK077)
- Sterilizer PM Kit (RPI Part #TUK122)
- Sterilizer PM Kit (RPI Part #TUK126)
- Sterilizer PM Kit (RPI Part #TUK127)
- Sterilizer PM Kit (RPI Part #TUK129)
- Sterilizer PM Kit (RPI Part #TUK130)
- Sterilizer PM Kit (RPI Part #TUK131)
- Sterilizer PM Kit (RPI Part #TUK132)
More Tuttnauer 3870E Parts Available→
SKU: TUJ033-3870E -
3870E Parts (RPI), Tuttnauer, Tuttnauer Parts RPI
Tuttnauer 3870E DOOR SWITCH ACTIVATOR RPI Part #TUA066
3870E Parts (RPI), Tuttnauer, Tuttnauer Parts RPITuttnauer 3870E DOOR SWITCH ACTIVATOR RPI Part #TUA066
RPI Part #TUA066
OEM Part #CT312036Tuttnauer 3870E DOOR SWITCH ACTIVATOR
- Use to adjust the door switch activation
- Includes all parts as shown
- Also available: Door Switch (RPI Part #TUS014) and Rubber Boot for Door Switch (RPI Part #TUB072)
Fits: Door
More Tuttnauer 3870E Parts Available→
SKU: TUA066-3870E -
3870E Parts (RPI), Tuttnauer Parts RPI
Tuttnauer 3870E ELBOW FITTING (5/16″ TUBE x 1/4″ MPT) RPI Part #RPF716
3870E Parts (RPI), Tuttnauer Parts RPITuttnauer 3870E ELBOW FITTING (5/16″ TUBE x 1/4″ MPT) RPI Part #RPF716
RPI Part #RPF716
OEM Part #03012705/FIT100-03093870E ELBOW FITTING (5/16″ TUBE X 1/4″ MPT)
- Material: Brass
- Included in: Fill/Vent Valve Upgrade Assembly (RPI Part #AMA274), Multi-Purpose Valve Assembly (RPI Part #TUV025), Multi-Purpose Valve (RPI Part #TUV097), and Multi-Purpose Valve (RPI Part #TUV098)
Fits: Chamber Fill Port
SKU: RPF716-3870E -
3870E Parts (RPI), Tuttnauer Parts RPI
Tuttnauer 3870E FUSE HOLDER RPI Part #RPH659
RPI Part #RPH659
OEM Part #019101033870E FUSE HOLDER
- 3/16″ Quick Connect Tabs
- Uses standard 3AG (1/4″ dia. x 1-1/4″ lg.) fuse
- 20A @ 250VAC
- Low profile screwdriver slot knob
- Suggested mounting hole size: 1/2″
- Includes mounting hardware
Fits: Rear Panel
More Tuttnauer 3870E Parts Available→
SKU: RPH659-3870E -
3870E Parts (RPI), Tuttnauer Parts RPI
Tuttnauer 3870E GUAGE GUARD RPI Part #RPG694
RPI Part #RPG694
3870E GUAGE GUARD
- Soft rubber; Color: Blue
- Included in: Test Pressure Gauge (RPI Part #RPG461)
Fits: Test Pressure Gauge (RPI Part #RPG693) & Most 2-1/2″ Pressure/Vacuum Gauges with Bottom or Center Mount Port
SKU: RPG694-3870E -
3870E Parts (RPI), Tuttnauer Parts RPI
Tuttnauer 3870E MALE CONNECTOR (3/16″ x 1/4″ MPT) RPI Part #RPF688
-
3870E Parts (RPI), New, Tuttnauer, Tuttnauer Parts RPI
Tuttnauer 3870E PC BOARD (AJUNC-3) RPI Part #TUB154
3870E Parts (RPI), New, Tuttnauer, Tuttnauer Parts RPITuttnauer 3870E PC BOARD (AJUNC-3) RPI Part #TUB154
RPI Part #TUB154
OEM Part #03700029Tuttnauer 3870E PC BOARD (AJUNC-3)
- This board MUST be calibrated upon installation. For the tools and detailed instructions needed to calibrate this board, we recommend using the RPI Diagnostic Smart Kit® (RPI Part #TUK108).
- Also available: Pressure Transducer (RPI Part #TUT092) and Temp Sensor (PT-100) (RPI Part #TUS093) and Ribbon Cable (RPI Part #TUC144)
Fits: Electronics Bay
More Tuttnauer 3870E Parts Available→
SKU: TUB154-3870E -
3870E Parts (RPI), PM Kits, Tuttnauer Parts RPI
Tuttnauer 3870E PM KIT RPI Part #TUK131
RPI Part #TUK131
OEM Part #02610019 (Door Gasket only)3870E STERILIZER PM KIT
- SEE BELOW for parts included in this Kit
- All parts also sold separately
- Note that the Air Jet Valve included in this Kit has the RED Top (RPI Part #TUJ033)
- Also includes RPI PM Checklist
Model(s) This Part Fits: SEE BELOW
SKU: TUK131-3870E -
3870E Parts (RPI), Tuttnauer Parts RPI
Tuttnauer 3870E RPI Heater Hardware RPI Part #TUH052
RPI Part #TUH052
3870E Heater Hardware
Includes:
- 1/4-20 x 2″ lg. cap screw
- (2) #10 Ring Terminal #12-10 awg.
- (2) #10 ring terminal #16-14 awg.
- (4) #10 flat washer
- (2) hex nut #10-24
- barrel nut 1/4-20
- detent barrel slug
Fits: Heating Element
SKU: TUH052-3870E -
3870E Parts (RPI), Tuttnauer Parts RPI
Tuttnauer 3870E RPI Swivel Elbow (6MM BARB x 1/8″ MALE BSPP) RPF811
3870E Parts (RPI), Tuttnauer Parts RPITuttnauer 3870E RPI Swivel Elbow (6MM BARB x 1/8″ MALE BSPP) RPF811
RPI Part #RPF811
OEM Part #FIT 100-08213870E SWIVEL ELBOW (6MM BARB x 1/8″ MALE BSPP)
- Material: Nickel Plated Brass
- Includes: Sealing O-Ring
- Not suitable for use in continuously rotating or gyrating applications
- Included in: Water pumps (RPI Part #TUP089 and RPI Part #TUP090)
Fits: 3/16″ (6mm) I.D. Tubing, 1/8″ Female BSPP Port, and Water Pumps
SKU: RPF811-3870E -
3870E Parts (RPI), Tuttnauer Parts RPI
Tuttnauer 3870E SOLENOID VALVE (6mm) RPI Part #TUV085
RPI Part #TUV085
OEM Part #018101033870E SOLENOID VALVE (6mm)
- 6mm orifice
- Ports: 1/4 FPT
- Material: Brass body; EPDM plunger seat
- 12VDC; 12W
- Includes: 12VDC; 12W Magnetic Coil (RPI Part #TUC087), Plunger Valve Kit (RPI Part #TUK086) and Wire Connector w/Gasket (RPI Part #TUC084)
Fits:
- Water Pump Valve on models EZ9, EZ10 & EZ10k
- Manifold Fill Valve on Models 1730E/EK, 2340E/EK, 2540E/EK & 3870E
SKU: TUV085-3870E
