, , ,

Box – Tuttnauer T-System Clean Cleaning Tablets OEM TSC


FREE SHIPPING!

New – 1 Box of 12 Tablets

SAVE MONEY – PURCHASE BY THE CASE HERE!

 

 

 

$93.00

Tuttnauer T-System Clean 1 Box/12 Tablets

The T-System Clean tablet is composed of chemicals that are specifically designed for cleansing and removal of water deposit oxides and other sediments in the piping and chamber of steam sterilizers.

  • Environmentally safe
  • Concentrated citric acid-based cleaner
  • Removes lime and iron deposits
  • Formulated to remove scales from pipes, valves, and hinges
  • Eliminates oxidation and brightens the metal surface
  • Does not contain hydrochloric or phosphoric acid
CLEAN & SHINE Your Autoclave’s System

The easiest way to keep your autoclaves clean and free of hard water deposits.

A mild, acid concentrate tablet for quick and effective cleaning of your autoclave.

The T-System Clean tablet is composed of chemicals that are specifically designed for cleansing and removal of water deposit oxides and other sediments in the piping and the chamber of steam sterilizers.

  • Simple to use premeasured tablets
  • Replaces messy liquid detergents
  • Increases sterilization efficiency
  • Extends autoclave lifecycle
  • Odor free and easy to store

Effectively clean and descale the reservoir, chamber and tubing in minutes.

Tuttnauer Autoclave Chamber Cleaner is recommended for use in Dental Autoclaves, Laboratory Autoclaves, Medical Autoclaves, Ophthalmology Autoclaves, Pharmaceutical Autoclaves and more.

How To Use Tuttnauer Chamber Cleaner: A few simple steps to a hassle-free cleaning*

  • Place one cleaning tablet at the back of the autoclave chamber and close the door.
  • Choose the Chamber Clean cycle
  • Press start to begin the cleaning cycle
  • Post cleaning cycle, sterilization can be applied immediately

* For Instructions, please follow directions on the T-System Clean box.

For full instructions on how to use Chamber Clean see Technical Specs

Please Note:

DO NOT place T-System Clean Tablets in the T-Edge Chamber!

Place the tablet in the clean water reservoir only (it cleans the internal piping of the autoclave)

For optimal results it is recommended to run a cleaning cycle using T-SYSTEM CLEAN once every 2 weeks or every 20 cycles.

Note: If your device is connected to an automatic water fill, close the inlet valve before initiating the cleaning procedure.


 

 

System Clean Cleaning Procedure for the family of Tuttnauer Table-Top Autoclaves

It is recommended to perform the system clean procedure once every 2 weeks.

Note: If your device is connected to an automatic water fill, close the inlet valve before initiating the cleaning procedure.

Note: The chamber must be cold to avoid burns when removing the trays and holders.

Note: Use gloves to protect your hands from the chemicals.

All steps in this procedure must be completed without interruption.

1- Ensure there is water in the clean water reservoir and the screen indicates the proper water level
2- Remove the water tank cover and place one tablet from the tablet packing in the clean water reservoir.
3- Open the autoclave door.
4- Select the relevant program.
5- Remove all instruments, loads, trays, and shelf holders from the autoclave chamber.
6- Place the trays and shelf holder in the sink to be cleaned with a stainless steel Safe cleaner.
7- Close the autoclave door.
8- System Clean – Start the cycle.
9- The cycle cleans the piping and the chamber. The System Clean process lasts approx. 25 minutes.
10- Upon completion:

  • Open the autoclave door to enable the chamber to cool.
  • Empty both reservoirs – clean water and waste water*.
  • Remove the water tank top cover.
  • Wipe the walls, bottom and the electrode of the clean water reservoir.
  • Wipe the walls and bottom of the waste water reservoir.
  • When the chamber cools, wipe the walls of the chamber

*Please note!!!
The electrode in the clean water reservoir detects water; therefore, if the reservoir is not emptied, a relevant notification will appear on screen.

11- Fill the clean water reservoir with distilled water and run an Unwrapped Instrument cycle prior to returning the shelf holder and trays to the chamber.
12- Place the tray holder and trays back in the chamber.

SHOPPING CART

close