Enbio, Enbio Parts, Enbio Pro Parts
Enbio PRO Connector Viton 2153002 (A19-7-1/4) Metalwork OEM 1227935A
Enbio PRO Connector Viton 2153002 (A19-7-1/4) Metalwork OEM 1227935A
This Push-In Connector (OEM part number 1227935A) is a specialized, high-grade fluid fitting designed primarily for a push-in water line within the Enbio PRO medical-grade autoclave sterilizer.
$26.00
NEW (1) – Enbio PRO Connector Viton 2153002 (A19-7-1/4) Metalwork OEM 1227935A
Component Details:
- Viton Elastomer: The designation “Viton” means it utilizes high-performance fluoropolymer elastomer seals. Viton is chosen for its exceptional resistance to extreme heat, chemical degradation, aggressive steam, and high pressure.
- Engineering Specifications: The reference numbers indicate specific dimensions and thread pitches (A19-7-1/4) designed to safely couple internal components like pneumatic lines or fluid manifolds without leaking.
- Device Integration: It interfaces directly with the autoclave’s internal fluid control architecture, working in tandem with the vacuum pumps and solenoid valve assemblies to maintain airtight fractionated vacuum pulses.
Primary Functions:
- Withstands Harsh Sterilization Environments: Enbio autoclaves run intense Class B fractionated vacuum cycles, reaching process temperatures up to 278.6°F (137°C) and high operating pressures of 30.5 psi (2.1 bar). This connector handles continuous thermal expansion and contraction without cracking.
- Leak Prevention: It ensures an airtight seal. Any pressure drop would otherwise cause the autoclave to fail its automated strict vacuum and Bowie-Dick validation tests.
More Enbio PRO Parts Available Here!
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
- Thread Specification: G 1/4″ (Parallel cylindrical gas thread conforming to ISO 228-1 standard).
- Internal Core/Hose Interface: Designed for a 7mm internal diameter (ID) high-pressure silicone or PTFE pneumatic fluid/vacuum line.
- Body Material: OT58 Brass (High-tensile, corrosion-resistant brass alloy optimized for high-temperature steam environments).
- Gasket Material: Viton® (FMC / FKM) fluoropolymer elastomer.
- Chemical Resistance: Immune to steam degradation, distilled water mineral stripping, and typical biological autoclave cleaners.
- Sealing Type: Re-releasable mechanical compression seal designed to hold full fractionated vacuum down to -0.99 bar without atmospheric leakage.
- Maximum Operating Pressure: Continuous rating up to 60 bar (870 psi); safely exceeds the Enbio PRO / Enbio S maximum working ceiling of 2.3 bar (33.3 psi).
- Process Temperature Limit: Rated for environments up to 302°F (150°C); comfortably sustains the autoclave’s peak sterilization cycle temperature of 278.6°F (137°C).
There are no reviews yet.