RPI
Showing 97–144 of 809 results
-
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9 RPI HEATER WIRE HARNESS RPI Part #MIH327
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMidmark M9 RPI HEATER WIRE HARNESS RPI Part #MIH327
RPI Part #MIH327
M9 HEATER WIRE HARNESS
Includes:
- Size: # 14 AWG 14.00″ lg. wire, 1/4″ QC Terminals
- Also available: Jumper Wire (RPI Part #MIJ328) and Main Harness (RPI Part #MIH238)
Fits: PC Board to Heater (Newer Style Units Only)
Model This Part Fits:
- M9-020 thru -022
SKU: MIH327-M9 -
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9 RPI JUMPER WIRE RPI Part #MIJ328
RPI Part #MIJ328
OEM Part #015-1640-00M9 Jumper Wire
- Size: #14 AWG, 2.85″ lg. wire, 1/4″ QC flag terminals
- Included in: Main Harness (RPI Part #MIH238)
- Also available: Heater Wire Harness (RPI Part #MIH327)
Function: It’s primary purpose is to connect two high-limit safety thermostats together. This connection acts as a critical fail-safe to prevent the autoclave’s chamber from overheating if it accidentally runs dry.
Fits: Hi Limit Thermostat to Thermostat (Newer Style Units Only)
Model This Part Fits:
- M9-020 / 021 / 022
SKU: MIJ328-M9 -
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts
Midmark M9 SNAP-IN AC RECEPTACLE RPI Part #RPR290
RPI Part #RPR290
OEM Part #015-0639-00M9 SNAP-IN AC RECEPTACLE
- 15A @ 250VAC
- 1/4″ quick connect tabs
- Panel cutout: .787″ x 1.083″ (20mm x 27.5 mm); .060″ (1.5mm) maximum panel Thk.
- For use with C13 Power Cord
- See below for Models this part fits
Fits: Rear Panel
Models This Part Fits:
- M9-001 thru -019
- M9-020 thru -022
SKU: RPR290-M9 -
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9 SOLENOID VALVE (AIR VALVE) (New Style Units) RPI Part #MIV118
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMidmark M9 SOLENOID VALVE (AIR VALVE) (New Style Units) RPI Part #MIV118
RPI Part #MIV118
OEM Part #014-0419-00Midmark M9 ( SOLENOID VALVE (AIR VALVE)
- 120VAC / 60 Hz. FWR; 1/8″ orifice; 1/8 FPT; Port
- Brass body; Viton seats; Non-Manifold mount
- High Temperature coil: 180˚C (350˚F)
- Need Repair Kit? RPI Part #MIK119
- Need Coil only? RPI Part #MIC120
- See Notes below for Serial #’s this part fits
Fits: Air Valve newer style units
Model(s) This Part Fits: M9Notes: CHECK SERIAL NUMBERS HERE:
Fits M9-020 thru -022 with Serial # prefixes RN, RP, RR & V.
SKU: MIV118-M9 -
M9 - Parts (RPI), M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
MIDMARK M9 Spring Arm RPI Part #MIA086
M9 - Parts (RPI), M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMIDMARK M9 Spring Arm RPI Part #MIA086
RPI Part #MIA086
MIDMARK M9 Spring Arm
- Stainless Steel
Fits: Switch Bracket
Model This Part Fits:
- M19 (Older style without motor assembly)
- M9-001 thru -019
- M9D-001 thru -019
SKU: MIA086 -
M9 - Parts (RPI), M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9 Sterilizer PM Kit RPI Part #MIK158
M9 - Parts (RPI), M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMidmark M9 Sterilizer PM Kit RPI Part #MIK158
RPI Part #MIK158
MIDMARK M9 Sterilizer PM Kit
- ONLY FITS: Door WITH Metal Flap (OEM #030-0698-00)
- Important Note: The Door Gasket included in this Kit has been engineered to eliminate the need for the OEM’s metal ring. The OEM’s metal ring should not be used with this Gasket.
- All parts also sold separately (See Notes below for parts included in this Kit)
- Also available: Sterilizer PM Kit (RPI Part #MIK072) for door without metal flap; Door Insulator Pad (RPI Part #MIP040); Mid-Clean™ (RPI Part #MIC143); and, Cleaning Kit (RPI Part #RPK791)
Fits: Door with Metal Flap
Model This Part Fits:
- M9-001 thru -019
- M9D-001 thru -019
Parts Included:
- See Below
SKU: MIK158 -
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts, New
MIDMARK M9 TEMPERATURE PROBE ASSEMBLY (NEW STYLE UNITS) RPI Part #MIS121
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMIDMARK M9 TEMPERATURE PROBE ASSEMBLY (NEW STYLE UNITS) RPI Part #MIS121
RPI Part #MIS121
OEM Part #015-1680-00M9 TEMPERATURE SENSOR
- Range: 1.07KΩ to 1.1KΩ @ 25˚C (Positive Temperature Coefficient)
- Material: Stainless steel housing; 1/4″ MPT
- Wires: 18-1/2″ lg.
- Also available: Temperature Probe Assembly (RPI Part #MIP050)
Fits: Rear Chamber Port (newer style units)
Model This Part Fits:
- M9-020 thru -022
SKU: MIS121-M9 -
M9 - Parts (RPI), Midmark, Midmark Autoclave Parts, New
MIDMARK M9 Vent Valve Coil RPI Part #MIC059
RPI Part #MIC059
M9 VENT VALVE COIL
- Manifold mount; AC Valve
- 180˚ C 271 – 318Ω
- 120VAC/ 60Hz.
- Valve Also available: RPI Part #MIS045
Fits:Vent solenoid valve assembly (manifold mount) older style units
Model This Part Fits:
- M9-001 thru -019 with Serial #’s CZ1000 thru CZ1109
SKU: MIC059 -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
MIDMARK M9D (New Style) SOLENOID VALVE (FILL) RPI Part #MIV138
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMIDMARK M9D (New Style) SOLENOID VALVE (FILL) RPI Part #MIV138
RPI Part #MIV138
OEM Part #002-1360-00/014-0420-02M9D SOLENOID VALVE (FILL)
- Piston Style Valve Operator Only
- Material: Viton seat; Manifold mount
- 120 VAC 50/60Hz. FWR; 14W
- Need Repair Kit? (RPI Part #RCK113)
- Need Coil? (RPI Part #RCC114)
- See Serial # breakdown below.
Fits: Manifold Block Assembly newer style units
Notes:
Also included in:
- Fill/Vent Valve Assembly (RPI Part #MIA137)
Also available:
- Solenoid Valve (Vent) (RPI Part #MIV139)
- Manifold Block Assembly (RPI Part #MIA096)
- Spanner Nut (RPI Part #ILS014)
- Double Ended Wrench (RPI Part #RPT501)
Serial # Prefix Breakdown:
- Fits M9D-020 thru -022 with Serial # prefixes RW, RX & V.
More Midmark M9D RPI Parts Available →
SKU: MIV138-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
MIDMARK M9D (New Style) SOLENOID VALVE (VENT) RPI Part #MIV139
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMIDMARK M9D (New Style) SOLENOID VALVE (VENT) RPI Part #MIV139
RPI Part #MIV139
OEM Part #002-1361-00/014-0420-03M9D SOLENOID VALVE (VENT)
- Piston Style Valve Operator Only
- Material: Viton seat; Manifold mount; AC valve
- 120 VAC 50/60Hz. FWR; 14W
- Need Repair Kit? (RPI Part # MIK110)
- Need Coil? (RPI Part # RCC114)
- See NOTES below for Serial # breakdown
Fits: Manifold Block Assembly newer style units
Notes:
Includes:
- Male Connector (RPI Part #RPF228)
Also Included in:
- Fill/Vent Valve Assembly (RPI Part #MIA137)
Also Available
- Solenoid Valve (Fill) (RPI Part # MIV138)
- Manifold Block Assembly (RPI Part #MIA096)
- Spanner Nut (RPI Part #ILS014)
- Double Ended Wrench (RPI Part #RPT501)
Serial # Prefix breakdown
- Fits M9D-020 thru -022 with Serial # prefixes RW, RX & V.
SKU: MIV139-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9D AIR VENT BELLOWS ASSEMBLY RPI #RCB089
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMidmark M9D AIR VENT BELLOWS ASSEMBLY RPI #RCB089
RPI Part #RCB089
OEM Part #002-0375-00/014-0193-00MIDMARK M9D AIR VENT BELLOWS ASSEMBLY
- 1/4” compression fittings both ends
- Material: Bronze diaphragm style; Stainless steel housing
- Mount to tubing between temperature gauge and reservoir
- Actuates within 12°F of saturated steam temperature
See below for serial numbers this part fits
More Midmark M9D RPI Parts Available →
SKU: RCB089-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9D DOOR SPRING RPI Part #MIS076
RPI Part #MIS076
OEM Part #050-2347-00Midmark M9D DOOR SPRING
- 2 per package
- Stainless steel
- Note: (2) springs makes it easier to open chamber door
Fits: Chamber
Models This Part Fits:
- M9D-001 thru -019
- M9D-020 thru -022
Service Tip: Install (2) springs to help in door opening process.
More Midmark M9D RPI Parts Available →
SKU: MIS076-M9D -
M9D - Parts (RPI), Midmark Autoclave Parts, New
Midmark M9D DOOR SWITCH ASSEMBLY (Old Style Units) RPI #MIS039
M9D - Parts (RPI), Midmark Autoclave Parts, NewMidmark M9D DOOR SWITCH ASSEMBLY (Old Style Units) RPI #MIS039
RPI Part #MIS039
OEM Part #002-0362-00M9D DOOR SWITCH ASSEMBLY #MIS039
- 0.1A@125/250 VAC; SPDT; N.O.
Fits: Switch weldment (older style units)
Models This Part Fits:
- M9D-001 thru -019
More Midmark M9D RPI Parts Available →
SKU: MIS039-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts
Midmark M9D FAN RPI Part #MIF091
RPI Part #MIF091
Midmark M9D FAN
- 115VAC; 50/60Hz; 3000 RPM
- Size: 3.15″ H x 3.15″ L x 1.50″ W
- Materials: Aluminum, black finish; Ball bearing construction
- See below for Models this part fits
Fits: Water Reservoir (newer style units)
Models This Part Fits:
- M9D-020 thru -022 with Serial # prefixes RW, RX & V
SKU: MIF091-M9D -
M9D - Parts (RPI), Midmark Autoclave Parts, New
Midmark M9D FILL/VENT MESH CHAMBER FILTER RPI Part #MIF062 OEM Part #002-0360-00 / 016-0790-00
M9D - Parts (RPI), Midmark Autoclave Parts, NewMidmark M9D FILL/VENT MESH CHAMBER FILTER RPI Part #MIF062 OEM Part #002-0360-00 / 016-0790-00
RPI Part #MIF062
OEM Part #002-0360-00 (Mesh Style) / 016-0790-00 (Mesh Style)FILL/VENT MESH CHAMBER FILTER (STAINLESS STEEL)
- 2 per package
- Size: 30 x 30 mesh stainless steel mesh
- Can be used to filter chamber debris at fill and vent ports
- Also available: Filter (Sintered Style) (RPI Part #MIF038)
- See Notes below:
Fits: Chamber, Fill Tube and Vent Tube
Midmark • Ritter Models This Part Fits:
- M9-001 thru -019
- M9-020 thru -022
- M9D-001 thru -019
- M9D-020 thru -022
SKU: MIF062-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts
Midmark M9D FUSE (15A, 250V) – 1/4″ X 1-1/4″ – FAST ACTING RPI Part #RPF281
M9D - Parts (RPI), Midmark, Midmark Autoclave PartsMidmark M9D FUSE (15A, 250V) – 1/4″ X 1-1/4″ – FAST ACTING RPI Part #RPF281
RPI Part #RPF281
OEM Part #015-0346-07FUSE (15A, 250V) – 1/4″ X 1-1/4″ – FAST ACTING
- 5 per package
- Type: Ceramic; 3AB, Fast Acting
- Size: 1/4″ dia. x 1-1/4″ lg.
Fits: PC Board/Fuse Holder
See below for models this part fits
SKU: RPF281-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9D RPI HEATER WIRE HARNESS RPI Part #MIH327
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMidmark M9D RPI HEATER WIRE HARNESS RPI Part #MIH327
RPI Part #MIH327
M9D HEATER WIRE HARNESS
Includes:
- Size: # 14 AWG 14.00″ lg. wire, 1/4″ QC Terminals
- Also available: Jumper Wire (RPI Part #MIJ328) and Main Harness (RPI Part #MIH238)
Fits: PC Board to Heater (Newer Style Units Only)
Model This Part Fits:
- M9D-020 thru -022
SKU: MIH327-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9D RPI JUMPER WIRE RPI Part #MIJ328
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMidmark M9D RPI JUMPER WIRE RPI Part #MIJ328
RPI Part #MIJ328
OEM Part #015-1640-00M9D Jumper Wire
- Size: #14 AWG, 2.85″ lg. wire, 1/4″ QC flag terminals
- Included in: Main Harness (RPI Part #MIH238)
- Also available: Heater Wire Harness (RPI Part #MIH327)
Function: It’s primary purpose is to connect two high-limit safety thermostats together. This connection acts as a critical fail-safe to prevent the autoclave’s chamber from overheating if it accidentally runs dry.
Fits: Hi Limit Thermostat to Thermostat (Newer Style Units Only)
Model This Part Fits:
- M9D-020 / 021 / 022
SKU: MIJ328-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts
Midmark M9D SNAP-IN AC RECEPTACLE RPI Part #RPR290
M9D - Parts (RPI), Midmark, Midmark Autoclave PartsMidmark M9D SNAP-IN AC RECEPTACLE RPI Part #RPR290
RPI Part #RPR290
OEM Part #015-0639-00M9D SNAP-IN AC RECEPTACLE
- 15A @ 250VAC
- 1/4″ quick connect tabs
- Panel cutout: .787″ x 1.083″ (20mm x 27.5 mm); .060″ (1.5mm) maximum panel Thk.
- For use with C13 Power Cord
- See below for Models this part fits
Fits: Rear Panel
Models This Part Fits:
- M9D-001 thru -019
- M9D-020 thru -022
SKU: RPR290-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
Midmark M9D SOLENOID VALVE (AIR VALVE) (New Style Units) RPI Part #MIV118
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMidmark M9D SOLENOID VALVE (AIR VALVE) (New Style Units) RPI Part #MIV118
RPI Part #MIV118
OEM Part #014-0419-00Midmark M9D ( SOLENOID VALVE (AIR VALVE)
- 120VAC / 60 Hz. FWR; 1/8″ orifice; 1/8 FPT; Port
- Brass body; Viton seats; Non-Manifold mount
- High Temperature coil: 180˚C (350˚F)
- Need Repair Kit? RPI Part #MIK119
- Need Coil only? RPI Part #MIC120
- See Notes below for Serial #’s this part fits
Fits: Air Valve newer style units
Model(s) This Part Fits: M9DNotes: CHECK SERIAL NUMBERS HERE:
Fits M9D-020 thru -022 with Serial # prefixes RW, RX & V.
SKU: MIV118-M9D -
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, New
MIDMARK M9D TEMPERATURE PROBE ASSEMBLY (NEW STYLE UNITS) RPI Part #MIS121
M9D - Parts (RPI), Midmark, Midmark Autoclave Parts, NewMIDMARK M9D TEMPERATURE PROBE ASSEMBLY (NEW STYLE UNITS) RPI Part #MIS121
RPI Part #MIS121
OEM Part #015-1680-00M9D TEMPERATURE SENSOR
- Range: 1.07KΩ to 1.1KΩ @ 25˚C (Positive Temperature Coefficient)
- Material: Stainless steel housing; 1/4″ MPT
- Wires: 18-1/2″ lg.
- Also available: Temperature Probe Assembly (RPI Part #MIP050)
Fits: Rear Chamber Port (newer style units)
Model This Part Fits:
- M9D-020 thru -022
SKU: MIS121-M9D -
M11 - Parts (RPI), M11D - Parts (RPI), Midmark, Midmark Autoclave Parts
Midmark RPI M11 PRINTER FUSE RPF049
M11 - Parts (RPI), M11D - Parts (RPI), Midmark, Midmark Autoclave PartsMidmark RPI M11 PRINTER FUSE RPF049
RPI Part #RPF049
OEM Part #015-0346-08Midmark M11 PRINTER FUSE (3A, 250V) – 1/4 X 1-1/4 – FAST ACTING
- 5 per package
- AGC; Glass; 1/4″ dia. x 1-1/4″ lg.
- Fast-Acting
Fits: PC Board
Models This Part Fits:
- M11-001 thru -019
- M11D-001 thru -019
SKU: RPF049-M11 -
M9 - Parts (RPI), M9D - Parts (RPI), Midmark, Midmark Autoclave Parts
Midmark RPI M9 PRINTER FUSE RPF049
M9 - Parts (RPI), M9D - Parts (RPI), Midmark, Midmark Autoclave PartsMidmark RPI M9 PRINTER FUSE RPF049
RPI Part #RPF049
OEM Part #015-0346-08Midmark M9 PRINTER FUSE (3A, 250V) – 1/4 X 1-1/4 – FAST ACTING
- 5 per package
- AGC; Glass; 1/4″ dia. x 1-1/4″ lg.
- Fast-Acting
Fits: PC Board
Models This Part Fits:
- M9-001 thru -019
- M9D-001 thru -019
SKU: RPF049-M9 -
Misc Parts, PM Kits
Midmark RPI P21 & P22 Oil-Less Two Headed Compressor PM Kit #CMK155
RPI #CMK155 Preventive Maintenance Kit for Midmark P21 & P22 Oil-less Compressors
Kit Includes:
- Coalescing Filter Element (RPI Part #CMK027)
- (2) Replacement Filter Element (RPI Part #CME004)
- PM Sticker
- PM Checklist
- Free Shipping
SKU: CMK155 -
Misc Parts, PM Kits
Midmark RPI P72 Oil-Less Three Headed Compressor PM Kit #CMK157
RPI #CMK157 Preventive Maintenance Kit for Midmark P72 Oil-less Compressor
Kit Includes:
- Coalescing Filter Element (RPI Part #CMK027)
- (6) Air Filter Element (RPI Part #CME071)
- PM Sticker
- PM Checklist
- Free Shipping
SKU: CMK157 -
Midmark, Midmark Autoclave Parts, New
Midmark SOLENOID VALVE (AIR VALVE) (New Style Units) RPI Part #MIV118
Midmark, Midmark Autoclave Parts, NewMidmark SOLENOID VALVE (AIR VALVE) (New Style Units) RPI Part #MIV118
RPI Part #MIV118
OEM Part #014-0419-00SOLENOID VALVE (AIR VALVE)
- 120VAC / 60 Hz. FWR; 1/8″ orifice; 1/8 FPT; Port
- Brass body; Viton seats; Non-Manifold mount
- High Temperature coil: 180˚C (350˚F)
- Need Repair Kit? RPI Part #MIK119
- Need Coil only? RPI Part #MIC120
- See Notes below for Serial #’s this part fits
Fits: Air Valve newer style units
Model(s) This Part Fits: M11, M11D, M9, M9DNotes: CHECK SERIAL NUMBERS HERE:
Fits M9-020 thru -022 with Serial # prefixes RN, RP, RR & V.
Fits M9D-020 thru -022 with Serial # prefixes RW, RX & V.
Fits M11-020 thru -022 with Serial # prefixes RS, RT, RV & V.
Fits M11D-020 thru -022 with Serial # prefixes RY, RZ & V.SKU: MIV118 -
Misc Parts, Misc RPI Parts
Pelton & Crane RPI MICROSWITCH Part #MIS015
RPI Part #MIS015
OEM Part #002-0101-00/015-0072-00; 1881015Pelton & Crane MICROSWITCH
- 15A @ 125/250VAC; 1/2A @ 125 VDC; 1/4A @ 250 VDC
- Includes: Switch and (2pcs) 3/16” Quick Disconnect Terminals (RPI Part #RPT257)
- 3/16″ tabs
- See Notes below for Serial Numbers this part fits
Fits: Foot Control and Front Panel
Model(s) This Part Fits: Click here for listing.
Notes:
Check Serial Numbers Here:
- Fits Foot Control Model 105: G-1325 thru present, H-1020 thru present, CF-1000, CG-1000, CA-1000 thru present
- Fits Models 106, 107, 222, 305, 306, 307, 413, 415 & 622: All Serial #’s
- Fits Model 117: Single stage footswitch only
- Fits Model 405-001 thru -018: Serial # prefixes BG, BH, DK & DV
SKU: MIS015 -
Misc Parts, Misc RPI Parts
REPLACEMENT FILTER ELEMENT RPI Part #CME004
RPI Part #CME004
OEM Part # (Fits RPI Part #CMK003 only)REPLACEMENT FILTER ELEMENT
- Replacement filter element for Fresh Air Intake Filter Kit (RPI Part #CMK003) only
- Includes: O-Ring and PM sticker
- Size: ~1.56″ OD x 2.96″ lg.
- The RPI Advantage! – With the RPI Intake Filter Kit (RPI Part #CMK003), only this Filter needs replacement, not the entire Assembly! Plus, this Replacement Filter Element includes a PM Sticker that can be attached to Assembly for recording date that filter was replaced.
Fits: Fresh Air Intake Filter Kit (RPI Part #CMK003) only
Model(s) This Part Fits: Click here for listing.
SKU: CME004 -
Misc Parts, Misc RPI Parts
RPI COALESCING FILTER ELEMENT Part #CMK025
RPI Part #CMK025
OEM Part #ACA86055; 645-45010; JA40815000; CFE-375COALESCING FILTER ELEMENT
- Wilkerson® brand
- Size: 1.89″ OD x 2.80″ lg.
- Type C; 0.01 micron
- Includes: Filter Element, Seal, (1 pc) Bowl O-Ring (RPI Part #RPO677), PM sticker, and (1 pc) each of 2 additional Bowl O-Rings (RPI Part #RPO675 and RPI Part #RPO678)
- RPI Advantage! PM sticker is included and can be attached to Assembly for recording date that filter was replaced.
- Also available: Coalescing Filter Assembly (10 oz.) (RPI Part #CMA022)
Model(s) This Part Fits: Click here for listing.
SKU: CMK025 -
Misc Parts, Misc RPI Parts
RPI FILTER ELEMENT – 35 Micron filter Part #CME102
RPI Part #CME102
OEM Part #87367FILTER ELEMENT
- Size: ~1.53″ OD x 2.70″ lg.
- 35 micron filter
- Includes: Filter element, (1 pc) Bowl O-Ring (RPI Part #RPO829), mounting collar with O-Rings, and PM Sticker
- Also available: Filter Element (Top) (RPI Part #CME103)
Model(s) This Part Fits: Click here for listing.
SKU: CME102 -
1730E Parts (RPI), 1730EK Parts (RPI), 1730M Parts (RPI), 1730MK Parts (RPI), 2340E Parts (RPI), 2340EA Parts (RPI), 2340EK Parts (RPI), 2340EKA Parts (RPI), 2340M Parts (RPI), 2340MK Parts (RPI), 2540E Parts (RPI), 2540EA Parts (RPI), 2540EHS Parts, 2540EK Parts (RPI), 2540EKA Parts (RPI), 2540M Parts (RPI), 2540MK Parts (RPI), 3850E Parts, 3850EA Parts, 3850M Parts, 3870E Parts (RPI), 3870EA Parts (RPI), 3870EHS Parts, 3870M Parts (RPI), EZ10k Parts (RPI), Tuttnauer Parts RPI
RPI Part – Tuttnauer SAFETY VALVE (37 PSI) RPI Part #TUV011 OEM Part #03110003
1730E Parts (RPI), 1730EK Parts (RPI), 1730M Parts (RPI), 1730MK Parts (RPI), 2340E Parts (RPI), 2340EA Parts (RPI), 2340EK Parts (RPI), 2340EKA Parts (RPI), 2340M Parts (RPI), 2340MK Parts (RPI), 2540E Parts (RPI), 2540EA Parts (RPI), 2540EHS Parts, 2540EK Parts (RPI), 2540EKA Parts (RPI), 2540M Parts (RPI), 2540MK Parts (RPI), 3850E Parts, 3850EA Parts, 3850M Parts, 3870E Parts (RPI), 3870EA Parts (RPI), 3870EHS Parts, 3870M Parts (RPI), EZ10k Parts (RPI), Tuttnauer Parts RPIRPI Part – Tuttnauer SAFETY VALVE (37 PSI) RPI Part #TUV011 OEM Part #03110003
RPI Part #TUV011
OEM Part #03110003SAFETY VALVE (37 PSI)
- Material: Brass body
- 1/4″ MPT
- Cracking Pressure: 37 PSI
- Also included in: Safety Valve Holder Kit (RPI Part #TUK053) & (RPI Part #TUK054)
- Also available: Safety Valve (40 PSI) (RPI Part #TUV065)
Fits: Safety Valve Holder
Model(s) This Part Fits: 1730E, 1730EK, 1730M, 1730MK, 2340E, 2340EA, 2340EK, 2340EKA, 2340M, 2340MK, 2540E, 2540EA, 2540EHS, 2540EK, 2540EKA, 2540M, 2540MK, 3850E, 3850EA, 3850M, 3870E, 3870EA, 3870EHS, 3870M, EZ10kSKU: TUV011 -
New, Statim 2000 Parts (RPI), Statim Parts
Scican Statim 2000 BIOLOGICAL FILTER RPI Part #SCF032 OEM Part #01-102119S
New, Statim 2000 Parts (RPI), Statim PartsScican Statim 2000 BIOLOGICAL FILTER RPI Part #SCF032 OEM Part #01-102119S
RPI Part #SCF032
OEM Part #01-102119SBIOLOGICAL FILTER
- 3/16″ ID hose connector
- Size: 1.60″ W x 2.70″ lg. x .80″ thk.
- PM Service Tip: The OEM recommends replacing the Biological Filter every 6 months or every 500 cycles (whichever comes first).
- Also included in: Sterilizer PM Kits (RPI Part #SCK035) and (RPI Part #SCK036)
Fits: Air Compressor
More Scican Statim 2000 RPI Parts Available →
SKU: SCF032-2000 -
SciCan, Statim 2000 Parts (RPI)
Scican Statim 2000 Fuse 15A 250V Ceramic RPI Part #RPF071
RPI Part – #RPF071
Scican Statim 2000 FUSE (15A, 250V) – 1/4 X 1-1/4 – TIME DELAY
- 5 per package
- Type: Ceramic; Time Delay
- Size: 1/4″ dia. x 1-1/4″ lg. – TIME DELAY
Fits: Fuse Holder on Main PC Board marked “F1” and “F2” in older styles; and, “F2” and “F3” in newer styles
More Scican Statim 2000 RPI Parts Available →
SKU: RPF071-2000 -
New, Statim 5000 Parts (RPI)
Scican Statim 5000 AIR COMPRESSOR FILTER RPI Part #SCF031
RPI Part #SCF031
OEM Part #01-101652SSTATIM 5000 AIR COMPRESSOR FILTER
- Size: .75″ dia. x 1.63″ lg.; 1/4″ MPT
- Pore size: 150-300 microns
- Fits units with the MEDO Air Compressor Only
- PM Serivce Tip: The OEM recommends replacing the Compressor Filter every 6 months or every 500 cycles (whichever comes first).
Fits: Air Compressor
SKU: SCF031 -
New, SciCan, Statim 5000 Parts (RPI), Statim Parts
Scican Statim 5000 BIOLOGICAL FILTER RPI Part #SCF032 OEM Part #01-102119S
New, SciCan, Statim 5000 Parts (RPI), Statim PartsScican Statim 5000 BIOLOGICAL FILTER RPI Part #SCF032 OEM Part #01-102119S
RPI Part #SCF032
OEM Part #01-102119SBIOLOGICAL FILTER
- 3/16″ ID hose connector
- Size: 1.60″ W x 2.70″ lg. x .80″ thk.
- PM Service Tip: The OEM recommends replacing the Biological Filter every 6 months or every 500 cycles (whichever comes first).
- Also included in: Sterilizer PM Kits (RPI Part #SCK035) and (RPI Part #SCK036)
Fits: Air Compressor
SKU: SCF032-5000 -
SciCan, Statim 5000 Parts (RPI)
Scican Statim 5000 Fuse 15A 250V Ceramic RPI Part #RPF071
RPI Part – #RPF071
Scican Statim 5000 FUSE (15A, 250V) – 1/4 X 1-1/4 – TIME DELAY
- 5 per package
- Type: Ceramic; Time Delay
- Size: 1/4″ dia. x 1-1/4″ lg. – TIME DELAY
Fits: Fuse Holder on Main PC Board marked “F1” and “F2” in older styles; and, “F2” and “F3” in newer styles
More Scican Statim 5000 RPI Parts Available Here →
SKU: RPF071-5000 -
New, SciCan, Statim G4 2000 Parts RPI, Statim Parts
Scican Statim G4 2000 BIOLOGICAL FILTER RPI Part #SCF032 OEM Part #01-102119S
New, SciCan, Statim G4 2000 Parts RPI, Statim PartsScican Statim G4 2000 BIOLOGICAL FILTER RPI Part #SCF032 OEM Part #01-102119S
RPI Part #SCF032
OEM Part #01-102119SG4 2000 BIOLOGICAL FILTER
- 3/16″ ID hose connector
- Size: 1.60″ W x 2.70″ lg. x .80″ thk.
- PM Service Tip: The OEM recommends replacing the Biological Filter every 6 months or every 500 cycles (whichever comes first).
- Also included in: Sterilizer PM Kits (RPI Part #SCK035) and (RPI Part #SCK036)
Fits: Air Compressor
More Scican Statim G4 2000 OEM Parts Available →
SKU: SCF032-G42000 -
SciCan, Statim G4 2000 Parts RPI
Scican Statim G4 2000 Fuse 15A 250V Ceramic RPI Part #RPF071
RPI Part – #RPF071
Scican Statim G4 2000 FUSE (15A, 250V) – 1/4 X 1-1/4 – TIME DELAY
- 5 per package
- Type: Ceramic; Time Delay
- Size: 1/4″ dia. x 1-1/4″ lg. – TIME DELAY
Fits: Fuse Holder on Main PC Board marked “F1” and “F2” in older styles; and, “F2” and “F3” in newer styles
More Scican Statim G4 2000 RPI Parts Available →
SKU: RPF071-G42000 -
New, Statim G4 5000 Parts RPI
Scican Statim G4 5000 AIR COMPRESSOR FILTER RPI Part #SCF031
RPI Part #SCF031
OEM Part #01-101652SSTATIM G4 5000 AIR COMPRESSOR FILTER
- Size: .75″ dia. x 1.63″ lg.; 1/4″ MPT
- Pore size: 150-300 microns
- Fits units with the MEDO Air Compressor Only
- PM Serivce Tip: The OEM recommends replacing the Compressor Filter every 6 months or every 500 cycles (whichever comes first).
Fits: Air Compressor
More Scican Statim G4 5000 RPI Parts Available Here →
SKU: SCF031-G45000 -
New, SciCan, Statim G4 5000 Parts RPI, Statim Parts
Scican Statim G4 5000 BIOLOGICAL FILTER RPI Part #SCF032 OEM Part #01-102119S
New, SciCan, Statim G4 5000 Parts RPI, Statim PartsScican Statim G4 5000 BIOLOGICAL FILTER RPI Part #SCF032 OEM Part #01-102119S
RPI Part #SCF032
OEM Part #01-102119SG4 5000 BIOLOGICAL FILTER
- 3/16″ ID hose connector
- Size: 1.60″ W x 2.70″ lg. x .80″ thk.
- PM Service Tip: The OEM recommends replacing the Biological Filter every 6 months or every 500 cycles (whichever comes first).
- Also included in: Sterilizer PM Kits (RPI Part #SCK035) and (RPI Part #SCK036)
Fits: Air Compressor
More Scican Statim G4 5000 OEM Parts Available →
SKU: SCF032-G45000 -
SciCan, Statim G4 5000 Parts RPI
Scican Statim G4 5000 Fuse 15A 250V Ceramic RPI Part #RPF071
RPI Part – #RPF071
Scican Statim G4 5000 FUSE (15A, 250V) – 1/4 X 1-1/4 – TIME DELAY
- 5 per package
- Type: Ceramic; Time Delay
- Size: 1/4″ dia. x 1-1/4″ lg. – TIME DELAY
Fits: Fuse Holder on Main PC Board marked “F1” and “F2” in older styles; and, “F2” and “F3” in newer styles
More Scican Statim G4 5000 OEM Parts Available Here →
SKU: RPF071-G45000 -
New, Statim 2000 Parts (RPI), Statim 5000 Parts (RPI), Statim G4 2000 Parts RPI, Statim G4 5000 Parts RPI
Scican Statim RPI 2000 / 5000 Thermocouple Reducer Fitting SCF045
New, Statim 2000 Parts (RPI), Statim 5000 Parts (RPI), Statim G4 2000 Parts RPI, Statim G4 5000 Parts RPIScican Statim RPI 2000 / 5000 Thermocouple Reducer Fitting SCF045
FREE SHIPPING!
- Material: Brass
- Size: 1/16″ Tube x 3/16″ Tube
Model(s) This Part Fits: Statim 2000, Statim 5000, Statim G4 2000, Statim G4 5000
SKU: SCF045
