New

• RPI exclusive tool to easily align probe bracket steam ports to cassette in the field – It’s the RPI Advantage!
• Size: 1.50″ x .31″ x .25″
• Material: Aluminum
• Compact and easy to use
• Also included in: RPI Field Service Smart Kit® (RPI Part #SCK028)
• See Notes below

Fits: Cassette to Probe Bracket
Model(s) This Part Fits: Statim 2000, Statim 5000, Statim G4 2000, Statim G4 5000

Notes: If using the RPI Alignment Tool (RPI Part #SCT052), the cassette seal must be removed before continuing with Alignment Tool installation.         

• 4 per package – 1/8 oz. foil pouches
• Use when maintaining or replacing Cassette Seal (RPI Part #SCS001 and RPI Part #SCS029)
• SDS Sheet available – see Notes below

Model(s) This Part Fits: Statim 2000, Statim 5000, Statim 900, Statim G4 2000, Statim G4 5000

Notes: Please see the Safety Data Sheet for this part. (Adobe PDF)

Also Included in:

• Cassette Seal (RPI Part #SCS001 and RPI Part #SCS029)
• Sterilizer PM Kit (RPI Part #SCK035 and RPI Part #SCK036)
• Field Service Smart Kit® (RPI Part #SCK028)

Also Avaiable:

• Sci-Dry™ (16 oz. Refill) (RPI Part #SCA046)
• Sci-Dry™ (2 oz.) (RPI Part #SCA054)
• Cleaning Kit (RPI Part #RPK791)

• Size: 1.08″ ID x 2.08″ OD x .31″ Thk.
• Material: Polyethylene/Polyurethane Foam
• 40 micron rating
• Used with Air Compressor Kit (RPI Part #SCK020) and Pump (Scican Part #01-100560S or Pelton & Crane Part #3325086)
• Also included in: Air Compressor Kit (RPI Part #SCK020)
• PM Service Tip: The OEM recommends replacing the Compressor Filter every 6 months or every 500 cycles (whichever comes first).

Fits: Air Compressor
Model(s) This Part Fits: Delta 10″ (AF), Delta 8″ (AE), Delta Q10, Delta Q8, Delta XL10, Delta XL8, Statim 2000, Statim G4 2000, Statim G4 5000

• Includes: (4 pcs) Compression Sleeve (RPI Part #RPF215), (4 pcs) Compression Nut (RPI Part #RPF219), (4) 3/16″ OD formed tubing

Fits: Probe Bracket to Boiler, Solenoid Valve and Alex Upgrade Kit
Model(s) This Part Fits: Statim 2000, Statim G4 2000

• See Notes below for parts included in this kit
• See Notes below for “The RPI Advantage”
• PM Service Tip – The OEM recommends replacing the filter every 6 months or every 500 cycles (wichever comes first).
• Also available: Drain Tube Assembly (RPI Part #RPK432)

Fits: From the Reservoir to the Pump Filter to the Pump to the Drain Line
Model(s) This Part Fits: Statim 2000

Notes: To upgrade the Scican Statim® 5000, order the Drain Tubing Kit (RPI Part #RPK432) and the Female Quick Disconnect Fitting (RPI Part #RPF428). The Statim 5000 comes equiped with the drain Line and Plug.

The RPI Advantage – The need for Pump Filter replacement is easily detected with RPI’s Clear Tubing and Filter. Draining is simplified with the addition of our Quick Disconnect System – Just Attach the tubing and you are ready to drain.

Includes:

• Cord Clip (RPI Part #ADC058)
• Barb Tee (RPI Part #RPB703)
• Cable Clamp (RPI Part #RPC701)
• Cable Holder (RPI Part #RPC702)
• Cable Tie (3 pieces) (RPI Part #RPT083)
• Drain Tubing Kit (RPI Part #RPK432)
• Female Quick Disconnect Fitting (RPI Part #RPF428)
• Hex Nut (RPI Part #RPH111)
• Silicone Tubing (RPI Part #RPT373)
• Water Filter (In-Line) (RPI Part #SCF034)