Refurbished Midmark M9D Ultraclave (New Style) 2 Year WRNTY
FREE SHIPPING!!!
WE WANT TO BUY YOUR OLD AUTOCLAVE, YOU CAN USE IT AS CREDIT TO SAVE MONEY ON THIS UNIT!
$4,274.00
Refurbished Midmark M9D Ultraclave (New Style) 2 Year WRNTY
Sterilization is made easy by the Midmark Ritter M9 Autoclave. Simply press the Start/Standby button and this autoclave will fill itself with the appropriate amount of water automatically. Once the autoclave is filled with water, select your cycle and the M9 will set the time for you. Cycle time from start to finish is 22 minutes (if cold) and 12 minutes (if hot).
Four pre-programmed sterilization cycle controls for the Ritter/Midmark M9D:
Unwrapped (132º C or 270º F for 3 minutes)
Pouched (132ºC or 270º F for 5 minutes)
Packs (121º C or 250º F for 30 minutes)
Handpieces (132º C or 270º F for 6 minutes).
Extended Warranty for this unit:
- Refurbished: 2 year parts and labor (buyer pays shipping and we take care of the rest!) warranty, BUMPER TO BUMPER!!
Quality Guarantee: In our business model, we take pride in each and every machine that we sell, right down to the last detail. We run our units a minimum of 25 complete cycles during our quality assurance phase. You can rest assured when you are buying from us you are buying QUALITY! DO NOT SETTLE, BUY from the BEST.
- Overall Length w/Plug: 20.4″ (51.8 cm)
- Overall Width: 15.3″ (38.9 cm)
- Overall Height w/Printer: 15.8″ (40.1 cm)
- Minimum Counter Top Area: 15.3″ x 17.9″ (38.9 cm x 45.4 cm)
- Unit Weight: 73 lbs (33.1 kg)
- Shipping Weight: 81 lbs. (36.7 kg)
- Water Reservoir Capacity: 1.1 gallons (4.1 liters)
- Electrical Requirements: 115 VAC, 50/60 Hz, 15 Amps, Single Phase. Please note that a separate, dedicated circuit is recommended for this sterilizer.
- Chamber Diameter: 9″ (22.9 cm)
- Chamber Depth: 15″ (38.1 cm)
- Chamber Volume: 3.5 gallon (13.4 liters)
- Large Tray Size (2 Included): 7.3″ (18.6cm) Wide x 12″ (30.5cm) Long x .8″ (2.2cm) DeepSmall Tray Size (2 Included): 5.6″ (14.3cm) Wide x 12″ (30.5cm) Long x .8″ (2.2cm) Deep
- Meets the requirements of ASME Boiler and Pressure Vessel Code
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
7 - Parts (RPI), M7 - Parts (RPI), M9 - Parts (RPI), New, M9D - Parts (RPI), M11 - Parts (RPI), M11D - Parts (RPI), Midmark, Midmark Autoclave Parts
Midmark HEATER MOUNTING HARDWARE RPI Part #RCH119 OEM Part #002-1350-00
7 - Parts (RPI), M7 - Parts (RPI), M9 - Parts (RPI), New, M9D - Parts (RPI), M11 - Parts (RPI), M11D - Parts (RPI), Midmark, Midmark Autoclave PartsMidmark HEATER MOUNTING HARDWARE RPI Part #RCH119 OEM Part #002-1350-00
RPI Part #RCH119
OEM Part #002-1350-00MIDMARK HEATER MOUNTING HARDWARE
- Includes: (2) Fiber Gasket (RPI Part #RPG925), (2) Stainless Steel Flat Washer, (2) Stainless Steel Internal Tooth Washer, (2) 7/16-20 Brass Jam Nut, and (2) 7/16-28 Brass Jam Nut
- Included in: (RPI Part #MIH048, RPI Part #MIH049 & RPI Part #RCH118)
- This Hardware Kit includes two sets of Brass Jam Nuts. Use the 7/16-20 Brass Jam Nuts on the RPI Heater only, and use the 7/16-28 Brass Jam Nuts on the OEM Heater only.
- See Notes below for Models this part fits
Fits: Chamber/Heater
Model(s) This Part Fits: 7, M11, M11D, M7, M9, M9DModels This Part Fits:
- M9-001 thru -019
- M9-020 thru -022
- M9D-001 thru -019
- M9D-020 thru -022
- M11-001 thru -019
- M11-020 thru -022
- M11D-001 thru -019
- M11D-020 thru -022
SKU: RCH119 -
M9 - Parts (RPI), New, M9D - Parts (RPI), Midmark, Midmark Autoclave Parts
Midmark M7 FILL VENT VALVE RPI Part #RCV052 OEM Part #014-0402-00 / H98136 / 36906
M9 - Parts (RPI), New, M9D - Parts (RPI), Midmark, Midmark Autoclave PartsMidmark M7 FILL VENT VALVE RPI Part #RCV052 OEM Part #014-0402-00 / H98136 / 36906
RPI Part #RCV052
OEM Part #014-0402-00 / H98136 / 36906FILL VENT VALVE
- Material: Brass body; EP seals
- Includes (x2) 3/8″ male connector fittings and “L” Bracket
- Please see the Tech Talk article Reintroducing the Fill-Vent Valve (RPI Part #RCV052)
- See Notes below for serial numbers this part fits
Fits: Fill-Vent Bracket Assembly
Model(s) This Part Fits: 1200, 1250, 7, M7
Notes:
Includes:
- Valve Stem Kit (RPI Part #RCS098)
- O-Ring (RPI Part #RPO306)
- O-Ring (RPI Part #RPO307)
CHECK SERIAL NUMBERS HERE:
M7 (011) serial #MH3105 thru present & V2200 thru present
M7 (012) serial #MJ1242 thru present & V2200 thru present
M7 (014) serial #ML4210 thru present & V2200 thru present
M7 (013/015/016) all serial #’s
SpeedClave® 7 all serial #’sSKU: RCV052
There are no reviews yet.